AMK325BB7105KA-T_技术文档

Notice for TAIYO YUDEN productsꢀ

Please read this notice before using the TAIYO YUDEN products.

REMINDERS

■ Product information in this catalog is as of October 2010. All of the contents speciﬁed herein are subject to change

without notice due to technical improvements, etc. Therefore, please check for the latest information carefully be-

fore practical application or usage of the Products.

Please note that Taiyo Yuden Co., Ltd. shall not be responsible for any defects in products or equipment incorpo-

rating such products, which are caused under the conditions other than those speciﬁed in this catalog or individual

speciﬁcation.

■ Please contact Taiyo Yuden Co., Ltd. for further details of product speciﬁcations as the individual speciﬁcation is

available.

■ Please conduct validation and veriﬁcation of products in actual condition of mounting and operating environment

before commercial shipment of the equipment.

■ All electronic components or functional modules listed in this catalog are developed, designed and intended for

use in general electronics equipment.(for AV, office automation, household, office supply, information service,

telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any

equipment in the ﬁeld such as transportation,( automotive control, train control, ship control), transportation signal,

disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have

direct inﬂuence to harm or injure a human body, please contact Taiyo Yuden Co., Ltd. for more detail in advance.

Do not incorporate the products into any equipment in ﬁelds such as aerospace, aviation, nuclear control, subma-

rine system, military, etc. where higher safety and reliability are especially required.

In addition, even electronic components or functional modules that are used for the general electronic equipment,

if the equipment or the electric circuit require high safety or reliability function or performances, a sufﬁcient reliabil-

ity evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to

install a protective circuit is strongly recommended at customer's design stage.

■ The contents of this catalog are applicable to the products which are purchased from our sales ofﬁces or distribu-

tors (so called“TAIYO YUDEN’s ofﬁcial sales channel”).

It is only applicable to the products purchased from any of TAIYO YUDEN’s ofﬁcial sales channel.

■ Please note that Taiyo Yuden Co., Ltd. shall have no responsibility for any controversies or disputes that may oc-

cur in connection with a third party's intellectual property rights and other related rights arising from your usage of

products in this catalog. Taiyo Yuden Co., Ltd. grants no license for such rights.

■ Caution for export

Certain items in this catalog may require speciﬁc procedures for export according to“Foreign Exchange and For-

eign Trade Control Law”of Japan,“U.S. Export Administration Regulations”, and other applicable regulations.

Should you have any question or inquiry on this matter, please contact our sales staff.

notice_e-01

HIGH VALUE MULTILAYER CERAMIC CAPACITORS

WAVE

REFLOW

■ FEATURES

■ APPLICATIONS

◦Gꢀ eneral digital circuit

◦ꢀThe use of nickel as electrode material and plating processing im-

prove the solderability and heat resistance characteristics. It also

prevents migration and raises the level of reliability.

◦Pꢀ ower supply bypass capacitors

Liquid crystal modules

◦ꢀLow equivalent series resistance(ESR) provides superior noise ab-

sorption characteristics.

Liquid crystal drive voltage lines

LSI, IC, converters(both for input and output)

◦ꢀCompared to tantalum or aluminum electrolytic capacitors, multilayer

ceramic capacitors offer a number of superior features, including:

Higher permissible ripple current values

◦Sꢀ moothing capacitors

DC-DC converters (for both input and output)

Switching power supplies (secondary side)

Smaller case sizes with high rated voltage

Improved reliability due to higher insulation resistance and breakdown

voltage.

■ PART NUMBER

J M K 3 1 6 △ B J 1 0 6 M L － T △

❶

❷

❸

❹

❺

❻

❼

❽

❾

❿

⓫

⓬

❻

Temperature

characteristics code

❶Rated ❷Series name

❸End

❹

Dimension

❼

Nominal

❽Capacitance

❿Special code ⓬Internal code

Standard

voltage

termination

capacitanc

〔e

pF〕

tolerance

Multilayer

ceramic

Type （inch） L×W［mm］

107 （0603） 1.6×0.8

212 （0805） 2.0×1.25

316 （1206） 3.2×1.6

325 （1210） 3.2×2.5

－

△

Standard

〔VDC〕

B

BJ

M

K

Plated

example

K

±10％

A

4

capacitor

❾

△＝Blank space

X5R

473

47,000

M

±20％

Thickness

J

6.3

10

16

25

35

50

B7

X7R

F

105 1,000,000

＋80

Z

％

〔mm〕

－20

L

⓫Packaging

K

A

D

G

L

0.45

△F

E

T

Y5V

φ178mm Taping

（4mm pitch）

All types

0.8

T

△＝Blank space

0.85

1.25

1.6

G

U

❺

Dimension tolerance［mm］

φ178mm Taping

（4mm pitch,

1000pcs/reel）

1210Typeꢁ

Code Type

L

W

T

Code Type

L

W

T

P

N

Y

M

1.9

△

ALL

107

Standard

0.45±0.05

0.8＋0.2/－0

0.85±0.1

107 1.6＋0.2/－0 0.8＋0.2/－0

212 2.0＋0.2/－0 1.25＋0.2/－0

2.0max

2.5

1.6＋0.15/－0.05

0.8＋0.15/－0.05

0.45±0.05

0.85±0.1

Thickness：M

B

212

2.0＋0.15/－0.05

1.25＋0.15/－0.05

1.25＋0.2/－0

A

1.25＋0.15/－0.05

0.85±0.1

△＝Blank space

316

325

3.2±0.2

3.2±0.3

1.6±0.2

2.5±0.3

1.6±0.2

2.5±0.3

■ STANDARD EXTERNAL DIMENSIONS/STANDARD QUANTITY

Dimension [mm]

T

Standard quantity [pcs]

Type

L

W

e

Paper tape Embossed tape

0.45±0.05

0.8±0.10

K

A

K

D

G

D

G

L

□MK107

1.6±0.10

0.8±0.10

0.35±0.25

4000

—

（0603 inch）

0.45±0.05

0.85±0.10

1.25±0.10

0.85±0.10

1.25±0.10

1.6±0.20

0.85±0.10

1.9±0.20

1.9＋0.1/－0.2

2.5±0.20

□MK212

（0805 inch）

2.0±0.10

3.2±0.15

1.25±0.10

1.6±0.15

0.5±0.25

—

4000

3000

—

3000

□MK316

（1206 inch）

0.5＋0.35/－0.25

0.6±0.3

—

2000

D

N

Y

M

2000

□MK325

（1210 inch）

3.2±0.30

2.5±0.20

500（T）, 1000（P）

■ AVAILABLE CAPACITANCE RANGE

107

B/X5R

212

B/X5R

316

B/X5R

325

B/X5R

Type

Cap

X7R

F/Y5V

X7R

F/Y5V

X7R

F/Y5V

X7R

F/Y5V

〔μF〕

VDC 50 25 16 10 6.3 50 35 25 16 10 6.3

〔3-digit〕

104

4

50 25 16 10 50 35 25 16 10 6.3 50 25 16 10 6.3 50 16 10 6.3 50 25 16 10 6.3 50 25 16 10 6.3

4

35 25 16 10 50 25 16 10 6.3 50 35 25 16 10 6.3 16 10 6.3

0.1

A

G

0.15 154

0.22 224

0.33 334

0.47 474

0.68 684

A

L

A

G

1

105

A

G

L

2.2 225

3.3 335

4.7

A

G

L

N

M N

N

475

A

G

L

N

M N

N

6.8 685

10

22

47

106

226

476

A

G

L

N

M N M.N

N

M

N

M.Y

L

M M

Y N N

M M

M M M.N

N

100 107

L

M

M.Y

Note：Letters in the table indicate product thickness.ꢁ■■ X5R only

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlcc01_e-01

4

●Low Proﬁle Multilayer Ceramic Capacitors

107

B/X5R

212

B/X5R

316

325

B/X5R

Temperature characteristics

Applicable

standard

Type

Temp.char.

Code

Capacitance

tolerance〔％〕

Cap

〔μF〕

X7R

F/Y5V

B/X5R

F/Y5V

Temperature Ref. Temp. Capacitance

VDC

〔3-digit〕

104

224

334

474

684

105

225

335

475

685

106

226

476

25 16 10 6.3 16 10 50 25 16 10 6.3 50 10 6.3 50 25 16 10 6.3 50 35 10 6.3 25 16 10

range〔℃〕

－25～＋85

－55～＋85

－55～＋125

－25～＋85

－30～＋85

〔℃〕

change〔％〕

±10

±15

＋30/－80

＋22/－82

JIS

B

20

0.1

0.22

0.33

0.47

0.68

1

2.2

3.3

4.7

6.8

10

BJ

B7

F

±10（K）

±20（M）

EIA

JIS

EIA

X5R

X7R

F

25

D

25

D

20

＋80

（Z）

－20

Y5V

25

K

D

G

D

K

D

D. K D.K

D

G D

D

D.K

D

22

47

Note：Letters in the table indicate product thickness.ꢀ■■ X5R only

■ REPRESENTATIVE PART NUMBERS

●107TYPE

【Temperature Characteristic BJ:B/X5R】

・0.8mm thicknes（s A）

HALT

Capacitance

tolerance

〔%〕

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance

〔μF〕

tanδ

〔%〕

Thickness

〔mm〕

Part number 1

Part number 2

Note

% Rated

voltage

50V

UMK107 BJ474□A

UMK107 BJ105□A

GMK107 BJ105□A

TMK107 BJ224□A

TMK107 BJ474□A

TMK107 BJ105□A

TMK107 BJ225□A

EMK107 BJ224□A

EMK107 BJ474□A

EMK107 BJ105□A

EMK107 BJ225□A

EMK107 BJ475□A

LMK107 BJ224□A

LMK107 BJ474□A

LMK107 BJ105□A

LMK107 BJ225□A

LMK107 BJ475□A

LMK107 BJ106MA

JMK107 BJ225□A

JMK107 BJ475□A

JMK107 BJ106MA

AMK107 BJ106MA

AMK107 BJ226MA

UMK107ABJ474□A

X5R

0.47

1

±10, ±20

±20

10

5

0.8＋0.15/－0.05

0.8±0.1

R

150%

200%

150%

200%

150%

200%

150%

D

35V

25V

B/X5R

X5R

B/X5R*¹

B/X5R

X5R

B/X5R*¹

B/X5R

X5R

1

0.8±0.1

R

0.22

0.47

1

3.5

5

R/W

R

TMK107ABJ225□A

EMK107ABJ475□A

2.2

0.22

0.47

1

10

3.5

5

0.8＋0.15/－0.05

0.8±0.1

R

D

16V

10V

R/W

R

0.8±0.1

R

2.2

4.7

0.22

0.47

1

10

3.5

5

R

0.8＋0.15/－0.05

0.8±0.1

R

R/W

R

0.8±0.1

R

2.2

4.7

10

R

LMK107BBJ106MA

X5R

0.8＋0.2/－0

0.8±0.1

0.8＋0.15/－0.05

0.8±0.1

0.8＋0.2/－0

R

D

Special code：L

6.3V

4V

B/X5R

X5R

2.2

4.7

10

±10, ±20

±20

R

JMK107ABJ106MA

AMK107BBJ226MA

X5R

R

X5R

10

R

X5R

22

R

・0.45mm thicknes（s K）

HALT

Capacitance

tolerance

〔%〕

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance

〔μF〕

tanδ

〔%〕

Thickness

〔mm〕

Part number 1

Part number 2

Note

% Rated

voltage

25V

16V

10V

TMK107 BJ105□K

EMK107 BJ105□K

LMK107 BJ105□K

LMK107 BJ225□K

LMK107 BJ475MK

JMK107 BJ105□K

JMK107 BJ225□K

JMK107 BJ475MK

X5R

1

±10, ±20

±20

±10, ±20

±20

10

0.45±0.05

R

150%

B/X5R

X5R

1

2.2

4.7

1

LMK107BBJ475MK

X5R

D

Special code：L

6.3V

B/X5R

X5R

2.2

4.7

X5R

Capacitance tolerance code is applied to □ of part number.

*1ꢀWe may provide X7R for some itemes according to the individual speciﬁcation.

【Temperature Characteristic B7：X7R】

HALT

Capacitance

tolerance

〔%〕

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance

〔μF〕

tanδ

〔%〕

Thickness

〔mm〕

Part number 1

Part number 2

Note

% Rated

voltage

50V

25V

16V

UMK107 B7224□A

UMK107 B7474□A

TMK107 B7474□A

TMK107 B7105□A

EMK107 B7224□A

EMK107 B7474□A

EMK107 B7105□A

LMK107 B7224□A

LMK107 B7474□A

LMK107 B7105□A

LMK107 B7225□A

JMK107 B7224□A

JMK107 B7474□A

JMK107 B7105□A

X7R

0.22

0.47

1

±10, ±20

10

3.5

5

0.8±0.1

R

150%

200%

150%

200%

150%

R

0.22

0.47

1

R/W

R

10V

0.22

0.47

1

3.5

5

R/W

R

2.2

0.22

0.47

1

10

3.5

5

R

6.3V

R/W

R

Capacitance tolerance code is applied to □ of part number.

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlcc01_e-01

5

■ REPRESENTATIVE PART NUMBERS

【Temperature Characteristic F：Y5V】

HALT

Capacitance

tolerance

〔%〕

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance

〔μF〕

tanδ

〔%〕

Thickness

〔mm〕

Part number 1

Part number 2

Note

% Rated

voltage

50V

25V

16V

UMK107 F104ZA

TMK107 F474ZA

EMK107 F224ZA

EMK107 F474ZA

EMK107 F105ZA

EMK107 F225ZA

LMK107 F105ZA

LMK107 F225ZA

F/Y5V

0.1

0.47

0.22

0.47

1

＋80/－20

7

0.8±0.1

R/W

R

200%

7

16

2.2

1

R

10V

R

2.2

R

●212TYPE

【Temperature Characteristic BJ：B/X5R】

・1.25mm thicknes（s G）

HALT

Capacitance

tolerance

〔%〕

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance

〔μF〕

tanδ

〔%〕

Thickness

〔mm〕

Part number 1

Part number 2

Note

% Rated

voltage

50V

UMK212 BJ104□G

UMK212 BJ224□G

UMK212 BJ474□G

UMK212 BJ105□G

TMK212 BJ225□G

TMK212 BJ475□G

EMK212 BJ225□G

EMK212 BJ475□G

EMK212 BJ106□G

LMK212 BJ225□G

LMK212 BJ475□G

LMK212 BJ106□G

LMK212 BJ226MG

JMK212 BJ475□G

JMK212 BJ106□G

JMK212 BJ226MG

JMK212 BJ476MG

B/X5R*¹

B/X5R

X5R

0.1

0.22

0.47

1

±10, ±20

±20

3.5

5

1.25±0.1

R/W

R

200%

150%

200%

150%

200%

150%

200%

150%

25V

16V

2.2

4.7

2.2

4.7

10

5

TMK212ABJ475□G

10

5

1.25＋0.15/－0.05

1.25±0.1

1.25＋0.15/－0.05

1.25±0.1

1.25＋0.15/－0.05

1.25＋0.2/－0

1.25＋0.15/－0.05

1.25＋0.2/－0

R

B/X5R*¹

R

EMK212ABJ475□G B/X5R*¹

X5R

B/X5R*¹

LMK212ABJ475□G B/X5R*¹

5

R

EMK212ABJ106□G

10

5

R

10V

2.2

4.7

10

R

5

R

LMK212ABJ106□G

LMK212BBJ226MG

JMK212ABJ475□G

JMK212ABJ106□G

JMK212ABJ226MG

JMK212BBJ476MG

X5R

10

5

R

X5R

22

R

6.3V

B/X5R

X5R*¹

X5R

4.7

10

±10, ±20

±20

R

10

R

22

R

X5R

47

±20

R

・0.85mm thicknes（s D）

HALT

Capacitance

tolerance

〔%〕

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance

〔μF〕

tanδ

〔%〕

Thickness

〔mm〕

Part number 1

Part number 2

Note

% Rated

voltage

50V

25V

UMK212 BJ105□D

TMK212 BJ474□D

TMK212 BJ105□D

TMK212 BJ225□D

TMK212 BJ475□D

EMK212 BJ105□D

EMK212 BJ225□D

EMK212 BJ475□D

EMK212 BJ106□D

LMK212 BJ105□D

LMK212 BJ225□D

LMK212 BJ475□D

LMK212 BJ106□D

JMK212 BJ475□D

JMK212 BJ106□D

JMK212 BJ226MD

UMK212ABJ105□D

X5R

B/X5R

X5R

1

0.47

1

±10, ±20

±20

10

3.5

5

0.85±0.1

R

150%

200%

150%

200%

150%

200%

150%

200%

150%

D

TMK212ABJ225□D

TMK212BBJ475□D

2.2

4.7

1

5

10

5

16V

10V

B/X5R*¹

EMK212ABJ225□D B/X5R*¹

2.2

4.7

10

1

5

B/X5R

10

3.5

5

EMK212ABJ106□D

LMK212ABJ106□D

X5R

B/X5R*¹

B/X5R

X5R

2.2

4.7

10

4.7

10

22

10

6.3V

X5R

JMK212ABJ106□D

JMK212ABJ226MD

X5R

・0.45mm thicknes（s K）

HALT

Capacitance

tolerance

〔%〕

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance

〔μF〕

tanδ

〔%〕

Thickness

〔mm〕

Part number 1

Part number 2

Note

% Rated

voltage

10V

LMK212 BJ475□K

JMK212 BJ475□K

JMK212 BJ106MK

LMK212ABJ475□K

JMK212ABJ475□K

JMK212ABJ106MK

X5R

4.7

10

±10, ±20

±20

10

0.45±0.05

R

150%

6.3V

Capacitance tolerance code is applied to □ of part number.

*1ꢀWe may provide X7R for some itemes according to the individual speciﬁcation.

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlcc01_e-01

6

■ REPRESENTATIVE PART NUMBERS

【Temperature Characteristic B7：X7R】

・1.25mm thicknes（s G）

HALT

Capacitance

tolerance

〔%〕

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance

〔μF〕

tanδ

〔%〕

Thickness

〔mm〕

Part number 1

Part number 2

Note

% Rated

voltage

50V

UMK212 B7104□G

UMK212 B7224□G

UMK212 B7474□G

UMK212 B7105□G

GMK212 B7105□G

TMK212 B7105□G

TMK212 B7225□G

TMK212 B7475□G

EMK212 B7105□G

EMK212 B7225□G

EMK212 B7475□G

LMK212 B7105□G

LMK212 B7225□G

LMK212 B7475□G

LMK212 B7106MG

JMK212 B7106□G

X7R

0.1

0.22

0.47

1

±10, ±20

±20

3.5

10

1.25±0.1

R/W

R

200%

150%

200%

150%

200%

150%

35V

25V

1

3.5

10

1

1.25±0.1

2.2

4.7

1

R

D

TMK212AB7475□G

10

1.25＋0.15/－0.05

1.25±0.1

R

16V

10V

3.5

10

R/W

R

2.2

4.7

1

1.25±0.1

10

R

3.5

5

R/W

R

2.2

4.7

10

1.25±0.1

R

LMK212AB7106MG

10

1.25＋0.15/－0.05

R

D

6.3V

JMK212AB7106□G

±10, ±20

10

R

・0.85mm thicknes（s D）

HALT

Capacitance

tolerance

〔%〕

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance

〔μF〕

tanδ

〔%〕

Thickness

〔mm〕

Part number 1

Part number 2

Note

% Rated

voltage

16V

EMK212 B7474□D

EMK212 B7105□D

EMK212 B7225□D

LMK212 B7105□D

LMK212 B7225□D

LMK212 B7475□D

X7R

0.47

1

±10, ±20

3.5

5

0.85±0.1

R/W

R

200%

150%

200%

150%

EMK212AB7225□D

2.2

1

5

R

10V

3.5

5

R

LMK212AB7225□D

LMK212AB7475□D

2.2

4.7

R

10

R

Capacitance tolerance code is applied to □ of part number.

【Temperature Characteristic F：Y5V】

・1.25mm thicknes（s G）

HALT

Capacitance

tolerance

〔%〕

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance

〔μF〕

tanδ

〔%〕

Thickness

〔mm〕

Part number 1

Part number 2

Note

% Rated

voltage

50V

UMK212 F474ZG

UMK212 F105ZG

EMK212 F225ZG

LMK212 F475ZG

LMK212 F106ZG

JMK212 F106ZG

F/Y5V

0.47

1

＋80/－20

7

1.25±0.1

R/W

R

200%

16V

10V

2.2

4.7

10

7

9

16

R

6.3V

10

R

・0.85mm thicknes（s D）

HALT

Capacitance

tolerance

〔%〕

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance

〔μF〕

tanδ

〔%〕

Thickness

〔mm〕

Part number 1

Part number 2

% Rated

voltage

50V

10V

UMK212 F224ZD

LMK212 F225ZD

JMK212 F475ZD

F/Y5V

0.22

2.2

＋80/－20

7

9

0.85±0.1

R/W

R

200%

6.3V

4.7

16

R

●316Type

【Temperature Characteristic BJ：B/X5R】

・1.6mm thicknes（s L）

HALT

Capacitance

tolerance

〔%〕

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance

〔μF〕

tanδ

〔%〕

Thickness

〔mm〕

Part number 1

Part number 2

% Rated

voltage

50V

UMK316 BJ105□L

UMK316 BJ475□L

TMK316 BJ225□L

TMK316 BJ475□L

TMK316 BJ106□L

EMK316 BJ225□L

EMK316 BJ475□L

EMK316 BJ106□L

EMK316 BJ226ML

LMK316 BJ106□L

LMK316 BJ226ML

LMK316 BJ476ML

JMK316 BJ106□L

JMK316 BJ226□L

JMK316 BJ476ML

JMK316 BJ107ML

AMK316 BJ107ML

B/X5R*¹

X5R

B/X5R*¹

B/X5R

X5R*¹

B/X5R*¹

B/X5R

B/X5R*¹

B/X5R

B/X5R*¹

B/X5R

X5R

B/X5R*¹

B/X5R

X5R

1

±10, ±20

±20

±10, ±20

±20

±10, ±20

±20

3.5

10

3.5

5

1.6±0.2

R

200%

150%

200%

150%

200%

150%

200%

150%

200%

150%

4.7

2.2

4.7

10

25V

16V

R

5

R

2.2

4.7

10

3.5

5

R/W

R

5

R

EMK316ABJ226ML

22

10

5

R

10V

10

R

LMK316ABJ226ML

LMK316ABJ476ML

22

10

5

R

47

R

6.3V

10

R

JMK316ABJ226□L

JMK316ABJ476ML

JMK316ABJ107ML

AMK316ABJ107ML

22

10

R

47

R

X5R

100

±20

R

4V

X5R

R

Capacitance tolerance code is applied to □ of part number.

*1ꢀWe may provide X7R for some itemes according to the individual speciﬁcation.

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlcc01_e-01

7

■ REPRESENTATIVE PART NUMBERS

・0.85mm thicknes（s D）

HALT

Capacitance

tolerance

〔%〕

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance

〔μF〕

tanδ

〔%〕

Thickness

〔mm〕

Part number 1

Part number 2

Note

% Rated

voltage

50V

UMK316 BJ105□D

UMK316 BJ225□D

UMK316 BJ475□D

TMK316 BJ105□D

TMK316 BJ225□D

TMK316 BJ475□D

TMK316 BJ106□D

EMK316 BJ225□D

EMK316 BJ475□D

EMK316 BJ106□D

EMK316 BJ226MD

LMK316 BJ475□D

LMK316 BJ106□D

LMK316 BJ226MD

JMK316 BJ106□D

JMK316 BJ226MD

JMK316 BJ476MD

B/X5R

X5R

1

±10, ±20

±20

±10, ±20

±20

±10, ±20

±20

3.5

10

3.5

5

0.85±0.1

R

150%

200%

150%

200%

150%

200%

150%

200%

150%

2.2

4.7

1

UMK316ABJ475□D

TMK316ABJ106□D

D

25V

16V

B/X5R

X5R

2.2

4.7

10

2.2

4.7

10

22

4.7

10

22

10

22

47

X5R

10

3.5

5

B/X5R

X5R

10

5

EMK316ABJ226MD

LMK316ABJ226MD

X5R

10V

B/X5R

X5R

10

6.3V

B/X5R

X5R

JMK316ABJ226MD

JMK316ABJ476MD

X5R

±20

Capacitance tolerance code is applied to □ of part number.

【Temperature Characteristic B7：X7R】

HALT

Capacitance

tolerance

〔%〕

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance

〔μF〕

tanδ

〔%〕

Thickness

〔mm〕

Part number 1

Part number 2

Note

% Rated

voltage

50V

UMK316 B7224□L

UMK316 B7474□L

UMK316 B7105□L

UMK316 B7225□L

UMK316 B7475□L

TMK316 B7105□L

TMK316 B7225□L

TMK316 B7475□L

TMK316 B7106□L

EMK316 B7225□L

EMK316 B7106□L

LMK316 B7225□L

LMK316 B7475□L

LMK316 B7106□L

LMK316 B7226ML

JMK316 B7106□L

X7R

0.22

0.47

1

±10, ±20

±20

2.5

3.5

10

3.5

10

3.5

10

3.5

5

1.6±0.2

R/W

R

200%

150%

200%

150%

200%

150%

200%

2.2

4.7

1

R

UMK316AB7475□L

R

D

25V

R/W

R

2.2

4.7

10

TMK316AB7475□L

TMK316AB7106□L

R

D

R

16V

10V

2.2

10

R/W

R

EMK316AB7106□L

D

2.2

4.7

10

R/W

R

LMK316AB7106□L

LMK316AB7226ML

10

5

R

D

R

22

R

6.3V

10

±10, ±20

R

Capacitance tolerance code is applied to □ of part number.

【Temperature Characteristic F：F/Y5V】

・1.6mm thicknes（s L）

HALT

Capacitance

tolerance

〔%〕

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance

〔μF〕

tanδ

〔%〕

Thickness

〔mm〕

Part number 1

Part number 2

Note

% Rated

voltage

35V

25V

16V

10V

GMK316 F106ZL

TMK316 F106ZL

EMK316 F106ZL

LMK316 F226ZL

F/Y5V

10

22

＋80/－20

9

1.6±0.2

R

200%

9

16

・1.25mm thicknes（s G）

HALT

Capacitance

tolerance

〔%〕

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance

〔μF〕

tanδ

Thickness

〔mm〕

Part number 1

Part number 2

Note

% Rated

voltage

〔%〕

50V

35V

UMK316 F225ZG

GMK316 F475ZG

F/Y5V

2.2

4.7

＋80/－20

7

1.25±0.1

R/W

R

200%

・0.85mm thicknes（s D）

HALT

Capacitance

tolerance

〔%〕

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance

〔μF〕

tanδ

〔%〕

Thickness

〔mm〕

Part number 1

% Rated

voltage

10V

LMK316 F475ZD

JMK316 F106ZD

F/Y5V

4.7

10

＋80/－20

9

0.85±0.1

R

200%

6.3V

16

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlcc01_e-01

8

■ REPRESENTATIVE PART NUMBERS

●325Type

【Temperature Characteristic BJ：B/X5R】

・2.5mm thicknes（s M）

HALT

Capacitance

tolerance

〔%〕

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance

〔μF〕

tanδ

〔%〕

Thickness

〔mm〕

Part number 1

Part number 2

Note

% Rated

voltage

50V

UMK325 BJ475MM

UMK325 BJ106MM

TMK325 BJ106MM

EMK325 BJ226MM

EMK325 BJ476MM

LMK325 BJ226MM

LMK325 BJ476MM

LMK325 BJ107MM

JMK325 BJ476MM

JMK325 BJ107MM

X5R

B/X5R*¹

B/X5R

X5R

4.7

10

±20

5

2.5±0.2

2.5±0.3

2.5±0.2

2.5±0.3

R

150%

200%

150%

25V

16V

10

3.5

5

22

47

10

5

10V

B/X5R

X5R

22

47

10

LMK325ABJ107MM

JMK325ABJ107MM

X5R

100

47

6.3V

X5R

100

・1.9mm thicknes（s Y, N）

HALT

Capacitance

tolerance

〔%〕

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance

〔μF〕

tanδ

〔%〕

Thickness

〔mm〕

Part number 1

Part number 2

Note

% Rated

voltage

35V

GMK325 BJ225MN

GMK325 BJ475MN

GMK325 BJ106MN

TMK325 BJ335MN

TMK325 BJ475MN

TMK325 BJ106MN

EMK325 BJ475MN

EMK325 BJ106MN

LMK325 BJ226MY

LMK325 BJ106MN

JMK325 BJ226MY

JMK325 BJ107MY

JMK325 BJ476MN

B/X5R

X5R

2.2

4.7

10

±20

3.5

10

5

1.9±0.2

1.9＋0.1/－0.2

1.9±0.2

R

200%

150%

200%

150%

200%

150%

B/X5R

B/X5R*¹

B/X5R

B/X5R*¹

B/X5R

B/X5R*¹

B/X5R

X5R

25V

3.3

4.7

10

3.5

5

16V

10V

4.7

10

3.5

5

22

10

3.5

5

6.3V

22

1.9＋0.1/－0.2

1.9±0.2

100

47

10

X5R

・0.85mm thicknes（s D）

HALT

Capacitance

tolerance

〔%〕

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance

〔μF〕

tanδ

〔%〕

Thickness

〔mm〕

Part number 1

Part number 2

Note

% Rated

voltage

25V

16V

TMK325 BJ106MD

EMK325 BJ106MD

EMK325 BJ226MD

LMK325 BJ335MD

LMK325 BJ475MD

LMK325 BJ106MD

B/X5R

10

±20

5

0.85±0.1

R

150%

200%

150%

22

3.3

4.7

10

3.5

5

10V

5

*1ꢀWe may provide X7R for some itemes according to the individual speciﬁcation.

【Temperature Characteristic B7：X7R】

・2.5mm thicknes（s M）

HALT

Capacitance

tolerance

〔%〕

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance

〔μF〕

tanδ

〔%〕

Thickness

〔mm〕

Part number 1

Part number 2

Note

% Rated

voltage

50V

25V

16V

10V

6.3V

UMK325 B7475MM

TMK325 B7226MM

EMK325 B7226MM

LMK325 B7476MM

JMK325 B7476MM

X7R

4.7

22

47

±20

5

2.5±0.2

R

150%

200%

10

R

・1.9mm thicknes（s Y, N）

HALT

Capacitance

tolerance

〔%〕

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance

〔μF〕

tanδ

〔%〕

Thickness

〔mm〕

Part number 1

Part number 2

Note

% Rated

voltage

25V

TMK325 B7335MN

TMK325 B7475MN

EMK325 B7475MN

EMK325 B7106MN

LMK325 B7106MN

X7R

3.3

4.7

10

±20

3.5

1.9±0.2

R

200%

150%

200%

150%

200%

16V

10V

10

【Temperature Characteristic F：F/Y5V】

HALT

Capacitance

tolerance

〔%〕

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance

〔μF〕

tanδ

〔%〕

Thickness

〔mm〕

Part number 1

Part number 2

Note

% Rated

voltage

16V

10V

EMK325 F226ZN

LMK325 F226ZN

JMK325 F476ZN

F/Y5V

22

47

＋80/－20

16

1.9±0.2

R

200%

6.3V

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlcc01_e-01

9

■ ELECTRICAL CHARACTERISTICS

●Example of Impedance ESR vs. Frequency characteristics

Taiyo Yuden multilayer ceramic capacitor

■

EMK212ABJ106KG

EMK212 BJ106KG

JMK107ABJ106MA

AMK107BBJ226MA

AMK107 BJ226MA

TMK107 BJ105KA

JMK107 BJ106MA

TMK316 BJ106KL

EMK325 BJ476MM

LMK107 F225ZA

UMK316 F225ZG

JMK212ABJ226MG

JMK212 BJ226MG

JMK316ABJ476ML

JMK316 BJ476ML

JMK316ABJ107ML

JMK316 BJ107ML

GMK325 BJ106MN

LMK107 F105ZA

LMK212 F106ZG

JMK325 F476ZN

JMK325 BJ107MY

UMK107 F104ZA

UMK212 F105ZG

LMK316 F226ZL

UMK212 F224ZD

GMK316 F106ZL

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlcc01_e-01

10

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlcc01_e-01

11

STANDARD MULTILAYER CERAMIC CAPACITORS

CLASS1:TEMPERATURE COMPENSATING TYPE

（

）

REFLOW

■ FEATURES

■ APPLICATIONS

◦Gꢁ eneral electronic equipment

◦ꢁImproved higher density mounting.

◦Cꢁ ommunication equipment

（cellular phone, wireless applications, etc.）

◦ꢁMonolithic structure provides higher reliability.

◦A wide range of capacitance values available in standard case sizes.

■ PART NUMBER

U M K 1 0 5 △ C H 1 0 1 J V － F △

❶

❷

❸

❹

❺

❻

❼

❽

❾

❿

⓫

⓬

❶Rated voltage

〔VDC〕

❸End termination

Plated

❻Temperature characteristics〔ppm/℃〕

❽Capacitance

❿Special code

tolerance

K

C□：0

R□：－220 RH

S□：－330 SH、SJ、SK

T□：－470 TJ、TK

U□：－750 UJ、UK

SL：＋350～－1000

CH、CJ、CK

－

Standard

E

16

25

50

Tolerance

H：±60

J：±120

K：±250

C

D

F

±0.25pF

±0.5pF

±1pF

❹Dimension

T

⓫Packaging

Type （inch） L×W〔mm〕

042 （01005） 0.4×0.2

063 （0201） 0.6×0.3

105 （0402） 1.0×0.5

U

φ178mm Taping

（2mm pitch）

F

J

±5%

❷Series name

K

±10%

φ178mm Taping

（1mm pitch, 042 Type）

W

Multilayer ceramic

capacitor

□＝Tolerance

M

❾Thicknes〔s mm〕

⓬Internal code

❺Dimension tolerance

Standard

△＝Blank space

❼Nominal capacitance〔pF〕

example

C

0.2

0.3

0.5

△

Standard

△

P, T

W, V

△＝Blank space

0R5

010

100

0.5

1

10

※R＝decimal point

■ STANDARD EXTERNAL DIMENSIONS/STANDARD QUANTITY

Dimension [mm]

Standard quantity [pcs]

Type

L

W

T

e

Paper tape

Embossed tape

□MK042

0.4±0.02

0.2±0.02

0.3±0.03

0.5±0.05

C

0.1±0.03

－

40000

（01005 inch）

□MK063

（0201 inch）

□MK105

（0402 inch）

0.6±0.03

1.0±0.05

0.3±0.03

0.5±0.05

P, T

W,V

0.15±0.05

0.25±0.10

15000

10000

－

■ AVAILABLE CAPACITANCE RANGE

042

C□

063

105

50V

Type

C□

U□

C□

U□

SL

R□

S□

T□

Cap

［pF］

VDC

［3-digit］

16V

50V

25V

0.5

1

0R5

010

1R5

020

030

040

050

060

070

080

090

100

120

150

180

220

270

330

390

470

560

680

820

101

121

151

181

221

271

331

391

471

561

681

821

102

1.5

2

P

3

W

4

5

C

T

W

6

W

7

8

9

W

10

12

15

18

22

27

33

39

47

56

68

82

100

120

150

180

220

270

330

390

470

560

680

820

1000

T

C

V

Note: Letters in the table indicate thickness.

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlcc02_e-01

12

■ REPRESENTATIVE PART NUMBERS

●042TYPE

Class1【C△ characteristic】

HALT

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance Capacitance

Thickness

〔mm〕

Part number 1

Part number 2

Q

Note

% Rated

voltage

〔pF〕

tolerance

16V

EMK042 CK0R5CC

EMK042 CK010CC

EMK042 CK1R5CC

EMK042 CK020CC

EMK042 CJ030CC

EMK042 CH040CC

EMK042 CH050CC

EMK042 CH060DC

EMK042 CH070DC

EMK042 CH080DC

EMK042 CH090DC

EMK042 CH100DC

EMK042 CH120JC

EMK042 CH150JC

EMK042 CH180JC

EMK042 CH220JC

EMK042 CH270JC

EMK042 CH330JC

EMK042 CH390JC

EMK042 CH470JC

EMK042 CH560JC

EMK042 CH680JC

EMK042 CH820JC

EMK042 CH101JC

CK

CJ

0.5

1

±0.25pF

±0.5pF

±5%

410

420

0.2±0.02

R

200%

1.5

2

430

440

460

480

500

520

3

CH

4

5

6

7

540

8

560

580

600

640

700

9

10

12

15

18

22

27

33

39

47

56

68

82

100

760

840

940

1000

±5%

Note: Please contact Taiyo Yuden sales channels about items (capacitance and tolerance) other than listed above.

●063TYPE

Class1【C△ characteristic】

HALT

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance Capacitance

Thickness

〔mm〕

Part number 1

Part number 2

Q

Note

% Rated

voltage

〔pF〕

tolerance

50V

UMK063 CK0R5CP

UMK063 CK010CP

UMK063 CK1R5CP

UMK063 CK020CP

UMK063 CJ030CP

UMK063 CH040CP

UMK063 CH050CP

UMK063 CH060DP

UMK063 CH070DP

UMK063 CH080DT

UMK063 CH090DT

UMK063 CH100DT

UMK063 CH120JT

UMK063 CH150JT

UMK063 CH180JT

UMK063 CH220JT

UMK063 CH270JT

UMK063 CH330JT

UMK063 CH390JT

UMK063 CH470JT

UMK063 CH560JT

UMK063 CH680JT

UMK063 CH820JT

UMK063 CH101JT

CK

CJ

0.5

1

±0.25pF

±0.5pF

±5%

410

420

0.3±0.03

R

200%

Special code:G

1.5

2

430

440

460

480

500

520

3

CH

4

5

6

7

540

8

560

580

600

640

700

9

10

12

15

18

22

27

33

39

47

56

68

82

100

760

840

940

1000

±5%

Note: Please contact Taiyo Yuden sales channels about items (capacitance and tolerance) other than listed above.

Class1【U△ characteristic】

HALT

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance Capacitance

Thickness

〔mm〕

Part number 1

Part number 2

Q

Note

% Rated

voltage

〔pF〕

tolerance

25V

TMK063 UK0R5CT

ＴMK063 UK010CT

ＴMK063 UK1R5CT

ＴMK063 UK020CT

ＴMK063 UK030CT

TMK063 UJ040CT

TMK063 UJ050CT

TMK063 UJ060DT

TMK063 UJ070DT

TMK063 UJ080DT

TMK063 UJ090DT

TMK063 UJ100DT

TMK063 UJ120JT

TMK063 UJ150JT

UK

UJ

0.5

1

±0.25pF

±0.5pF

±5%

410

420

430

440

460

480

500

520

540

560

580

600

640

700

0.3±0.03

R

200%

1.5

2

3

4

5

6

7

8

9

10

12

15

±5%

Note: Please contact Taiyo Yuden sales channels about items (capacitance and tolerance) other than listed above.

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlcc02_e-01

13

■ REPRESENTATIVE PART NUMBERS

●105TYPE

Class1【C△ characteristic】

HALT

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance Capacitance

Thickness

〔mm〕

Part number 1

Part number 2

Q

Note

% Rated

voltage

〔pF〕

tolerance

50V

UMK105 CK0R5CW

UMK105 CK010CW

UMK105 CK1R5CW

UMK105 CK020CW

UMK105 CJ030CW

UMK105 CH040CW

UMK105 CH050CW

UMK105 CH060DW

UMK105 CH070DW

UMK105 CH080DV

UMK105 CH090DV

UMK105 CH100DV

UMK105 CH120JV

UMK105 CH150JV

UMK105 CH180JV

UMK105 CH220JV

UMK105 CH270JV

UMK105 CH330JV

UMK105 CH390JV

UMK105 CH470JV

UMK105 CH560JV

UMK105 CH680JV

UMK105 CH820JV

UMK105 CH101JV

UMK105 CH121JV

UMK105 CH151JV

UMK105 CH181JV

UMK105 CH221JV

UMK105 CH271JV

UMK105 CH331JV

CK

CJ

0.5

1

±0.25pF

±0.5pF

±5%

410

420

0.5±0.05

R

200%

1.5

2

430

440

3

460

CH

4

480

5

500

6

520

7

540

8

560

9

580

10

12

15

18

22

27

33

39

47

56

68

82

100

120

150

180

220

270

330

600

640

700

760

840

940

1000

±5%

Note: Please contact Taiyo Yuden sales channels about items (capacitance and tolerance) other than listed above.

Class1【U△ characteristic】

HALT

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance Capacitance

Thickness

〔mm〕

Part number 1

Part number 2

Q

Note

% Rated

voltage

〔pF〕

tolerance

50V

UMK105 UK0R5CW

UMK105 UK010CW

UMK105 UK1R5CW

UMK105 UK020CW

UMK105 UK030CW

UMK105 UJ040CW

UMK105 UJ050CW

UMK105 UJ060DW

UMK105 UJ070DW

UMK105 UJ080DW

UMK105 UJ090DW

UMK105 UJ100DW

UMK105 UJ120JW

UMK105 UJ150JW

UMK105 UJ180JW

UMK105 UJ220JV

UMK105 UJ270JV

UMK105 UJ330JV

UMK105 UJ390JV

UMK105 UJ470JV

UMK105 UJ560JV

UMK105 UJ680JV

UMK105 UJ820JV

UMK105 UJ101JV

UMK105 UJ121JV

UMK105 UJ151JV

UMK105 UJ181JV

UMK105 UJ221JV

UMK105 UJ271JV

UMK105 UJ331JV

UK

UJ

0.5

1

±0.25pF

±0.5pF

±5%

410

420

0.5±0.05

R

200%

1.5

2

430

440

3

460

4

480

5

500

6

520

7

540

8

560

9

580

10

12

15

18

22

27

33

39

47

56

68

82

100

120

150

180

220

270

330

600

640

700

760

840

940

1000

±5%

Note: Please contact Taiyo Yuden sales channels about items (capacitance and tolerance) other than listed above.

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlcc02_e-01

14

■ REPRESENTATIVE PART NUMBERS

Class1【SL characteristic】

HALT

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance Capacitance

Thickness

〔mm〕

Part number 1

Part number 2

Q

Note

% Rated

voltage

〔pF〕

tolerance

50V

UMK105 SL121JV

UMK105 SL151JV

UMK105 SL181JV

UMK105 SL221JV

UMK105 SL271JV

UMK105 SL331JV

SL

120

150

180

220

270

330

±5%

1000

0.5±0.05

R

200%

Note: Please contact Taiyo Yuden sales channels about items (capacitance and tolerance) other than listed above.

Class1【RH characteristic】

HALT

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance Capacitance

Thickness

〔mm〕

Part number 1

Part number 2

Q

Note

% Rated

voltage

〔pF〕

tolerance

50V

UMK105 RH5R6JW

UMK105 RH6R8JW

UMK105 RH8R2JW

UMK105 RH100JW

UMK105 RH120JW

UMK105 RH150JW

UMK105 RH180JW

UMK105 RH200JW

RH

5.6

6.8

8.2

10

±5%

512

536

564

600

640

700

760

800

0.5±0.05

R

200%

12

15

18

20

Note: Please contact Taiyo Yuden sales channels about items (capacitance and tolerance) other than listed above.

Class1【S△ characteristic】

HALT

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance Capacitance

Thickness

〔mm〕

Part number 1

Part number 2

Q

Note

% Rated

voltage

〔pF〕

tolerance

50V

UMK105 SK0R5BW

UMK105 SK010BW

UMK105 SK1R2BW

UMK105 SK1R5BW

UMK105 SK1R8BW

UMK105 SK2R2JW

UMK105 SK2R7JW

UMK105 SJ3R3JW

UMK105 SJ3R9JW

UMK105 SH4R7JW

UMK105 SH5R6JW

UMK105 SH6R8JW

UMK105 SH8R2JW

UMK105 SH100JW

UMK105 SH120JW

UMK105 SH150JW

UMK105 SH180JW

UMK105 SH200JW

SK

SJ

0.5

1

±0.1pF

±5%

410

420

424

430

436

444

454

466

478

494

512

536

564

600

640

700

760

800

0.5±0.05

R

200%

1.2

1.5

1.8

2.2

2.7

3.3

3.9

4.7

5.6

6.8

8.2

10

SJ

SH

12

15

18

20

Note: Please contact Taiyo Yuden sales channels about items (capacitance and tolerance) other than listed above.

Class1【T△ characteristic】

HALT

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance Capacitance

Thickness

〔mm〕

Part number 1

Part number 2

Q

Note

% Rated

voltage

〔pF〕

tolerance

50V

UMK105 TK0R5BW

UMK105 TK010BW

UMK105 TK1R2BW

UMK105 TK1R5BW

UMK105 TK1R8BW

UMK105 TK2R2JW

UMK105 TK2R7JW

UMK105 TK3R3JW

UMK105 TK3R9JW

UMK105 TJ4R7JW

UMK105 TJ5R6JW

UMK105 TJ6R8JW

UMK105 TJ8R2JW

UMK105 TJ100JW

UMK105 TJ120JW

UMK105 TJ150JW

UMK105 TJ180JW

UMK105 TJ200JW

TK

TJ

0.5

1

±0.1pF

±5%

410

420

424

430

436

444

454

466

478

494

512

536

564

600

640

700

760

800

0.5±0.05

R

200%

1.2

1.5

1.8

2.2

2.7

3.3

3.9

4.7

5.6

6.8

8.2

10

TJ

12

TJ

15

TJ

18

TJ

20

Note: Please contact Taiyo Yuden sales channels about items (capacitance and tolerance) other than listed above.

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlcc02_e-01

15

STANDARD MULTILAYER CERAMIC CAPACITORS

CLASS2 :HIGH DIELECTRIC CONSTANT TYPE

（

）

REFLOW

■ FEATURES

■ APPLICATIONS

◦ꢁImproved higher density mounting.

◦Gꢁ eneral electronic equipment

◦Cꢁ ommunication equipment

（cellular phone, wireless applications, etc.）

◦ꢁMonolithic structure provides higher reliability.

◦A wide range of capacitance values available in standard case sizes.

■ PART NUMBER

L M K 1 0 5 △ B J 1 0 4 K V － F △

❶

❷

❸

❹

❺

❻

❼

❽

❾

❿

⓫

⓬

❻Temperature

❽Capacitance

❿Special code

❶Rated voltage

〔VDC〕

❸End termination

❹Dimension

Type （inch） L×W〔mm〕

042 （01005） 0.4×0.2

characteristics code

tolerance

－

Standard

K

Plated

B

K

±10%

±20%

A

4

BJ

X5R

M

J

6.3

10

16

25

35

50

⓫Packaging

φ178mm Taping

（2mm pitch）

063 （0201）

0.6×0.3

B7

X7R

F

＋80

L

Z

%

105 （0402） 1.0×0.5

－20

F

E

T

△F

Y5V

φ178mm Taping

W

△＝Blank space

（1mm pitch, 042 Type）

G

U

❺Dimension tolerance［mm］

L

❼Nominal capacitance

〔pF〕

example

Code Type

W

T

⓬Internal code

❾Thicknes〔s mm〕

△

A

ALL

Standard

1.0±0.1

Standard

0.5±0.1

Standard

△

Standard

❷Series name

C

P

V

0.2

0.3

0.5

0.5±0.1

△＝Blank space

Multilayer ceramic

capacitor

105

M

102

223

1000

B

1.0＋0.15/－0.05 0.5＋0.15/－0.05 0.5＋0.15/－0.05

△＝Blank space

22000

■ STANDARD EXTERNAL DIMENSIONS/STANDARD QUANTITY

Dimension [mm]

Standard quantity [pcs]

Type

L

W

T

e

Paper tape

Embossed tape

□MK042

0.4±0.02

0.2±0.02

C

P

0.1±0.03

－

40000

（01005 inch）

□MK063

（0201 inch）

0.6±0.03

1.0±0.05

0.3±0.03

0.5±0.05

0.3±0.03

0.15±0.05

15000

－

0.2±0.02

0.3±0.03

0.5±0.05

C

P

V

20000

15000

10000

－

□MK105

（0402 inch）

0.25±0.10

■ AVAILABLE CAPACITANCE RANGE

●

Multilayer Ceramic Capacitorsꢀ

●

Low Proﬁle Multilayer Ceramic

Capacitorsꢀ

042

063

B/X5R

105

B/X5R

105

B/X5R

Type

X7R B/X5R

X7R

F/Y5V

Cap

［pF］

Cap

［pF］

VDC

10 10 6.3 25 16 25 16 10 6.3

4

50 25 16 10 6.3 50 35 25 16 10 6.3

4

50 25 16 10 6.3

25 16 10 6.3

〔3-digit〕

100

101

151

221

331

471

681

102

152

222

332

472

682

103

153

223

333

473

683

104

224

334

474

105

225

335

475

C

P

100

101

151

221

331

471

681

102

152

222

332

472

682

103

153

223

333

473

683

104

224

334

474

105

225

335

475

150

220

150

220

V

330

470

680

1000

1500

C

P

V

1500

2200

3300

4700

6800

10000

15000

22000

33000

47000

68000

100000

220000

330000

470000

1000000

2200000

3300000

4700000

V

10000

15000

22000

33000

47000

68000

100000

220000

330000

470000

1000000

2200000

3300000

4700000

P

V

C

P

V

P

C

P

V

C

V

P

C

P

V

Note：Letters in the table indicate product thickness.ꢀ■■ X5R only

Temperature characteristics

Temperature range〔℃〕

－25～＋85

Capacitance tolerance

Temp.char.Code

〔％〕

Applicable standard

Ref. Temp〔. ℃〕

Capacitance change〔％〕

JIS

EIA

JIS

EIA

B

20

25

20

25

±10

±15

＋30/－80

＋22/－82

BJ

B7

F

±10（K）

±20（M）

X5R

X7R

F

－55～＋85

－55～＋125

－25～＋85

－30～＋85

＋80

ꢀ

（Z）

－20

Y5V

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlcc03_e-01

16

■ REPRESENTATIVE PART NUMBERS

●042TYPE（01005 case size）

【Temperature Characteristic BJ:B/X5R】

HALT

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance Capacitance

tanδ

〔%〕

Thickness

〔mm〕

Part number 1

Part number 2

Note

% Rated

voltage

〔pF〕

tolerance

10V

LMK042 BJ101□C

LMK042 BJ151□C

LMK042 BJ221□C

LMK042 BJ331□C

LMK042 BJ471□C

LMK042 BJ681□C

LMK042 BJ102□C

LMK042 BJ152□C

LMK042 BJ222□C

LMK042 BJ332□C

LMK042 BJ472□C

LMK042 BJ682□C

LMK042 BJ103□C

JMK042 BJ152□C

JMK042 BJ222□C

JMK042 BJ332□C

JMK042 BJ472□C

JMK042 BJ682□C

JMK042 BJ103□C

JMK042 BJ223□C

B/X5R*¹

X5R

100

150

±10, ±20

5

0.2±0.02

R

200%

150%

5

220

5

330

5

470

5

680

5

1000

1500

2200

3300

4700

6800

10000

1500

2200

3300

4700

6800

10000

22000

5

10

X5R

6.3V

B/X5R*¹

X5R

Capacitance tolerance code is applied to □ of part number.

*1 We may provide X7S/X7R for some items according to the individual speciﬁcation.

【Temperature Characteristic B7：X7R】

HALT

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance Capacitance

tanδ

〔%〕

Thickness

〔mm〕

Part number 1

Part number 2

Note

% Rated

voltage

〔pF〕

tolerance

10V

LMK042 B7101□C

LMK042 B7151□C

LMK042 B7221□C

LMK042 B7331□C

LMK042 B7471□C

LMK042 B7681□C

LMK042 B7102□C

X7R

100

150

220

330

470

±10, ±20

5

0.2±0.02

R

200%

680

1000

Capacitance tolerance code is applied to □ of part number.

●063TYPE（0201 case size）

【Temperature Characteristic BJ:B/X5R】

HALT

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance Capacitance

tanδ

〔%〕

Thickness

〔mm〕

Part number 1

Part number 2

Note

% Rated

voltage

〔pF〕

tolerance

25V

TMK063 BJ101□P

TMK063 BJ151□P

TMK063 BJ221□P

TMK063 BJ331□P

TMK063 BJ471□P

TMK063 BJ681□P

TMK063 BJ102□P

TMK063 BJ152□P

TMK063 BJ222□P

TMK063 BJ332□P

TMK063 BJ472□P

TMK063 BJ682□P

TMK063 BJ103□P

EMK063 BJ152□P

EMK063 BJ222□P

EMK063 BJ332□P

EMK063 BJ472□P

EMK063 BJ682□P

EMK063 BJ103□P

LMK063 BJ223□P

LMK063 BJ333□P

LMK063 BJ473□P

LMK063 BJ683□P

LMK063 BJ104□P

LMK063 BJ224MP

JMK063 BJ223□P

JMK063 BJ333□P

JMK063 BJ473□P

JMK063 BJ683□P

JMK063 BJ104□P

JMK063 BJ224MP

AMK063 BJ224MP

AMK063 BJ334MP

AMK063 BJ474MP

B/X5R*¹

B/X5R

B/X5R*¹

B/X5R

X5R

100

150

±10, ±20

±20

3.5

5

0.3±0.03

R

200%

150%

200%

150%

220

330

470

680

1000

1500

2200

5

3300

5

4700

5

6800

5

10000

1500

5

16V

10V

6.3V

4V

5

2200

5

3300

5

4700

5

6800

5

10000

22000

33000

47000

68000

100000

220000

22000

33000

47000

68000

100000

220000

330000

470000

5

7.5

10

7.5

10

X5R

B/X5R

X5R

±10, ±20

±20

X5R

*2

X5R

Capacitance tolerance code is applied to □ of part number.

*1 We may provide X7R for some items according to the individual speciﬁcation.

*2 The exchange of individual speciﬁcation is necessary depending on the application and circuit condition. Please contact Taiyo Yuden sales channels.

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlcc03_e-01

17

■ REPRESENTATIVE PART NUMBERS

【Temperature Characteristic B7：X7R】

HALT

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance Capacitance

tanδ

〔%〕

Thickness

〔mm〕

Part number 1

Part number 2

Note

% Rated

voltage

〔pF〕

tolerance

25V

TMK063 B7101□P

TMK063 B7151□P

TMK063 B7221□P

TMK063 B7331□P

TMK063 B7471□P

TMK063 B7681□P

TMK063 B7102□P

EMK063 B7152□P

EMK063 B7222□P

EMK063 B7332□P

EMK063 B7472□P

EMK063 B7682□P

EMK063 B7103□P

X7R

100

150

±10, ±20

3.5

5

0.3±0.03

R

200%

220

330

470

680

1000

1500

2200

3300

4700

6800

10000

16V

5

Capacitance tolerance code is applied to □ of part number.

●105TYPE（0402 case size）

【Temperature Characteristic BJ:B/X5R】

・0.5mm thicknes（s V）

HALT

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance Capacitance

tanδ

〔%〕

Thickness

〔mm〕

Part number 1

Part number 2

Note

% Rated

voltage

〔pF〕

tolerance

50V

UMK105 BJ221□V

UMK105 BJ331□V

UMK105 BJ471□V

UMK105 BJ681□V

UMK105 BJ102□V

UMK105 BJ152□V

UMK105 BJ222□V

UMK105 BJ332□V

UMK105 BJ472□V

UMK105 BJ682□V

UMK105 BJ103□V

GMK105 BJ104□V

TMK105 BJ153□V

TMK105 BJ223□V

TMK105 BJ333□V

TMK105 BJ473□V

TMK105 BJ104□V

EMK105 BJ153□V

EMK105 BJ223□V

EMK105 BJ333□V

EMK105 BJ473□V

EMK105 BJ683□V

EMK105 BJ104□V

EMK105 BJ224□V

EMK105 BJ105□V

LMK105 BJ104□V

LMK105 BJ224□V

LMK105 BJ474□V

LMK105 BJ105□V

JMK105 BJ224□V

JMK105 BJ474□V

JMK105 BJ105□V

JMK105 BJ225MV

JMK105 BJ475MV

AMK105 BJ335MV

AMK105 BJ475MV

B/X5R*¹

B/X5R

B/X5R*¹

B/X5R

B/X5R*¹

B/X5R

B/X5R*¹

B/X5R

X5R

220

330

±10, ±20

±20

2.5

3.5

5

0.5±0.05

0.5＋0.15/－0.05

0.5±0.05

0.5±0.1

R

200%

150%

200%

150%

200%

150%

200%

150%

200%

150%

470

680

1000

1500

2200

3300

4700

6800

10000

100000

15000

22000

33000

47000

100000

15000

22000

33000

47000

68000

100000

220000

1000000

100000

220000

470000

1000000

220000

470000

1000000

2200000

4700000

3300000

4700000

35V

25V

3.5

5

16V

3.5

5

10

5

10V

B/X5R

X5R

5

10

5

X5R

6.3V

B/X5R

X5R

10

X5R

JMK105BBJ475MV

AMK105ABJ475MV

X5R

±20

D

4V

X5R

*2

X5R

Capacitance tolerance code is applied to □ of part number.

*1 We may provide X7R for some items according to the individual speciﬁcation.

*2 The exchange of individual speciﬁcation is necessary depending on the application and circuit condition. Please contact Taiyo Yuden sales channels.

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlcc03_e-01

18

■ REPRESENTATIVE PART NUMBERS

・0.3mm thicknes（s P）

HALT

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance Capacitance

tanδ

〔%〕

Thickness

〔mm〕

Part number 1

Part number 2

Note

% Rated

voltage

〔pF〕

tolerance

25V

TMK105 BJ103□P

TMK105 BJ104□P

TMK105 BJ224□P

EMK105 BJ474□P

JMK105 BJ105□P

B/X5R

X5R

10000

100000

220000

470000

1000000

±10, ±20

5

0.3±0.03

R

150%

10

X5R

16V

X5R

6.3V

X5R

・0.2mm thicknes（s C）

HALT

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance Capacitance

tanδ

〔%〕

Thickness

〔mm〕

Part number 1

Part number 2

Note

% Rated

voltage

〔pF〕

tolerance

10V

LMK105 BJ104□C

JMK105 BJ224□C

JMK105 BJ474□C

X5R

100000

220000

470000

±10, ±20

10

0.2±0.02

R

150%

6.3V

Capacitance tolerance code is applied to □ of part number.

【Temperature Characteristic B7:X7R】

HALT

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance Capacitance

tanδ

〔%〕

Thickness

〔mm〕

Part number 1

Part number 2

Note

% Rated

voltage

〔pF〕

tolerance

50V

UMK105 B7221□V

UMK105 B7331□V

UMK105 B7471□V

UMK105 B7681□V

UMK105 B7102□V

UMK105 B7152□V

UMK105 B7222□V

UMK105 B7332□V

UMK105 B7472□V

UMK105 B7682□V

UMK105 B7103□V

TMK105 B7152□V

TMK105 B7222□V

TMK105 B7332□V

TMK105 B7472□V

TMK105 B7682□V

TMK105 B7103□V

EMK105 B7223□V

EMK105 B7473□V

EMK105 B7104□V

LMK105 B7223□V

LMK105 B7473□V

LMK105 B7104□V

JMK105 B7224□V

X7R

220

330

±10, ±20

2.5

3.5

2.5

3.5

5

0.5±0.05

R

200%

150%

200%

150%

200%

150%

470

680

1000

1500

2200

3300

4700

6800

10000

1500

25V

2200

3300

4700

6800

10000

22000

47000

100000

22000

47000

100000

220000

16V

10V

3.5

5

6.3V

5

Capacitance tolerance code is applied to □ of part number.

【Temperature Characteristic F:Y5V】

HALT

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance Capacitance

tanδ

〔%〕

Thickness

〔mm〕

Part number 1

Part number 2

Note

% Rated

voltage

〔pF〕

tolerance

50V

25V

16V

UMK105 F103ZV

TMK105 F223ZV

EMK105 F473ZV

EMK105 F104ZV

LMK105 F224ZV

JMK105 F474ZV

JMK105 F105ZV

F/Y5V

10000

22000

＋80/－20

5

0.5±0.05

R

200%

150%

47000

7

100000

220000

470000

1000000

9

10V

11

12.5

20

6.3V

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlcc03_e-01

19

MULTILAYER CERAMIC CAPACITORS

FOR HIGH FREQUENCY APPLICATIONS

（1GHz+）

REFLOW

■ FEATURES

■ APPLICATIONS

◦ꢁQ value in the high frequency range (1 GHz+) is superior compared to

◦Sꢁ uitable for those high frequency applications in which a capacitor

with both a high Q-value and small size is required such as portable

communications and other wireless applications.

VCO, TCXO etc.

other types of multilayer capacitors.

◦ꢁThe 1005(0402) case size is designed for high density mounting and

weight reduction in various applications.

◦Aꢁ djustment of characteristics in high frequency circuit

■ PART NUMBER

U V K 1 0 5 △ R H 4 R 3 J W － F △

❶

❷

❸

❹

❺

❻

❼

❽

❾

❿

⓫

⓬

❺Dimension

❶Rated voltage

〔VDC〕

❸End termination

❼Nominal

capacitance〔pF〕

example

020

4R3

❽Capacitance

❿Special code

Standard

⓬ Internal code

Standard

tolerance

Standard

tolerance

K

Plated

－

△

E

16

B

J

±0.1pF

±5％

△=Blank Space

U

50

2

4.3

❻Temperature

characteristics〔ppm/℃〕

CH

❹Dimension

❾Thickness〔mm〕

0.5

⓫Packaging

φ178mm Taping

（2mm pitch）

❷Series name

※R＝Decimal point

Type （inch） L×W〔mm〕

105 （0402） 1.0×0.5

W

Multilayer ceramic

capacitor for high

frequency

0±60

－220±60

F

V

RH

■ STANDARD EXTERNAL DIMENSIONS/STANDARD QUANTITY

Dimension [mm]

Standard quantity [pcs]

Paper tape Embossed tape

Type

L

W

T

e

□VK105

（0402 inch）

1.0±0.05

0.5±0.05

0.25±0.1

10000

－

■ SPECIFICATIONS

●Capacitance vs Q value（Typical for CH characteristic）

Temperature

Coefﬁcient range

Temperature

Characteristics

Operating

Temperature range

Capacitance

Tolerance

[ppm/℃]

CH

RH

ꢀꢀ0±60

－220±60

±0.1pF（～2.0pF）

±5％（2.2pF～）

－55～＋125℃

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlcc04_e-01

20

■ PART NUMBERS

Temperature

characteristics

EHS

Rated Voltage

（DC）

(Environmental

Hazardous

Substances)

Capacitance Capacitance

Q

Thickness

[mm]

Part number

Typical Q

〔pF〕

tolerance

（at 1GHz（）min.）

CH

RH

□VK105 CH0R3BW

□VK105 CH0R4BW

□VK105 CH0R5BW

□VK105 CH0R6BW

□VK105 CH0R7BW

□VK105 CH0R8BW

□VK105 CH0R9BW

□VK105 CH010BW

□VK105 CH1R1BW

□VK105 CH1R2BW

□VK105 CH1R3BW

□VK105 CH1R5BW

□VK105 CH1R6BW

□VK105 CH1R8BW

□VK105 CH020BW

□VK105 CH2R2JW

□VK105 CH2R4JW

□VK105 CH2R7JW

□VK105 CH030JW

□VK105 CH3R3JW

□VK105 CH3R6JW

□VK105 CH3R9JW

□VK105 CH4R3JW

□VK105 CH4R7JW

□VK105 CH5R1JW

□VK105 RH0R5BW

□VK105 RH0R6BW

□VK105 RH0R7BW

□VK105 RH0R8BW

□VK105 RH0R9BW

□VK105 RH010BW

□VK105 RH1R1BW

□VK105 RH1R2BW

□VK105 RH1R3BW

□VK105 RH1R5BW

□VK105 RH1R6BW

□VK105 RH1R8BW

□VK105 RH020BW

□VK105 RH2R2JW

□VK105 RH2R4JW

□VK105 RH2R7JW

□VK105 RH030JW

□VK105 RH3R3JW

□VK105 RH3R6JW

□VK105 RH3R9JW

□VK105 RH4R3JW

□VK105 RH4R7JW

□VK105 RH5R1JW

RoHS

●

0.3

0.4

0.5

0.6

0.7

0.8

0.9

1.0

1.1

1.2

1.3

1.5

1.6

1.8

2.0

2.2

2.4

2.7

3.0

3.3

3.6

3.9

4.3

4.7

5.1

0.5

0.6

0.7

0.8

0.9

1.0

1.1

1.2

1.3

1.5

1.6

1.8

2.0

2.2

2.4

2.7

3.0

3.3

3.6

3.9

4.3

4.7

5.1

300

280

270

260

240

230

210

190

180

170

150

130

120

110

99

1200

1100

1000

950

930

850

740

±0.1pF

710

670

650

610

530

510

460

390

370

360

340

320

1100

1000

970

950

900

740

±5％

±0.1pF

±5％

84

E: 16V

U: 50V

0.5±0.05

84

●

300

280

270

260

240

230

210

190

180

170

150

130

120

110

99

700

680

640

620

570

480

470

420

360

350

340

320

310

84

□Please specify the Rated Voltage code.

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlcc04_e-01

21

SUPER LOW DISTORTION MULTILAYER

CERAMIC CAPACITORS

CFCAP^TM

（

）

REFLOW

■ FEATURES

■ APPLICATIONS

◦ꢁNewly developed dielectric material and the use of nickel for internal

electrodes provide superior temperature characteristics with high ca-

pacitance, small case size and low cost.

◦Sꢁ ignal line for AV products

◦Aꢁ nalog signal coupling applications

◦Pꢁ LL circuit of mobile phones

◦ꢁLow distortion and low shock noise make these capacitors appropri-

ate for use in analog or digital mobile devices.

◦Gꢁ ood temperature characteristics for time constant circuits, oscilla-

tion circuits and ﬁlters

◦ꢁSuperior heat-resistance, high breakdown voltage, and mechanical

strength make these capacitors appropriate for replacing ﬁlm capacitors.

■ PART NUMBER

T M K 3 1 6 △ S D 1 0 4 K L － T △

❶

❷

❸

❹

❺

❻

❼

❽

❾

❿

⓫

⓬

❹Dimension

⓬Internal code

Standard

△＝Blank space

❾Thickness

〔mm〕

❿Special code

❽Capacitance

❶Rated

❸End termination

❻Series symbol

SD Standard

Type （inch） L×W〔mm〕

105 （0402） 1.0×0.5

107 （0603） 1.6×0.8

212 （0805） 2.0×1.25

316 （1206） 3.2×1.6

tolerance

voltage〔VDC〕

△

－

Standard

K

Plated

P

0.3

K

±10%

U

G

T

E

L

50

35

25

16

10

6.3

❼Nominal

capacitance〔μF〕

example

V

A

D

F

0.5

⓫Packaging

0.8

φ178mm Taping

（4mm pitch）

107, 212, 316 Type

0.85

1.15

1.25

1.6

❷Series name

Multilayer ceramic

capacitor

223

104

0.022

0.1

T

F

❺Dimension tolerance

M

G

L

J

△

Standard

φ178mm Taping

（2mm pitch）

105 Type

△＝Blank space

■ STANDARD EXTERNAL DIMENSIONS/STANDARD QUANTITY

Dimension [mm]

Standard quantity [pcs]

Type

L

W

T

e

Paper tape

Embossed tape

0.3±0.03

0.5±0.05

P

V

□MK105

1.0±0.05

0.5±0.05

0.25±0.10

0.35±0.25

10000

－

（0402 inch）

□MK107

（0603 inch）

1.6±0.10

2.0±0.10

3.2±0.15

0.8±0.10

1.25±0.10

1.6±0.15

0.8±0.10

A

4000

－

0.85±0.10

1.25±0.10

1.15±0.10

1.6±0.20

D

G

F

4000

－

□MK212

（0805 inch）

0.5±0.25

－

3000

2000

□MK316

（1206 inch）

0.5＋0.35/ー0.25

－

L

■ AVAILABLE CAPACITANCE RANGE

105

SD

107

SD

212

SD

316

SD

Type

Cap

[pF]

VDC

[3-digit]

391

471

561

681

821

102

122

152

182

222

272

332

392

472

562

682

822

103

123

153

183

223

273

333

393

473

563

683

823

104

50V

25V

16V

10V

6.3V

50V

25V

16V

10V

50V

35V

16V

10V

35V

25V

390

470

560

680

820

1000

1200

1500

1800

2200

2700

V

A

V

P

3300

3900

4700

V

A

D

5600

6800

8200

10000

12000

15000

18000

22000

27000

33000

39000

47000

56000

68000

82000

100000

A

D

G

D

F

D

F

L

G

※Letters in the table indicate thickness.

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlcc05_e-01

22

■ REPRESENTATIVE PART NUMBERS

●105TYPE

・0.5mm thicknes（s V）

HALT

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance Capacitance

tanδ

〔%〕

Thickness

〔mm〕

Part number 1

Part number 2

Note

% Rated

voltage

〔pF〕

tolerance

50V

UMK105 SD391KV

UMK105 SD471KV

UMK105 SD561KV

TMK105 SD681KV

TMK105 SD821KV

TMK105 SD102KV

TMK105 SD122KV

EMK105 SD152KV

EMK105 SD182KV

EMK105 SD222KV

EMK105 SD272KV

LMK105 SD332KV

LMK105 SD392KV

LMK105 SD472KV

390

470

±10

0.1

0.5±0.05

R

200%

560

25V

16V

10V

680

820

1000

1200

1500

1800

2200

2700

3300

3900

4700

Standard

type

・0.3mm thicknes（s P）

HALT

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance Capacitance

tanδ

〔%〕

Thickness

〔mm〕

Part number 1

Part number 2

Note

% Rated

voltage

〔pF〕

tolerance

10V

LMK105 SD152KP

JMK105 SD272KP

1500

2700

±10

0.1

0.3±0.03

R

200%

Standard

type

6.3V

Note：Capacitance tolerance J (±5%) is also available. Please contact Taiyo Yuden sales channels.

●107TYPE

HALT

Soldering

R:Reﬂow

W:Wave

Internal

code

Rated

voltage

Temp.

char.

Capacitance Capacitance

tanδ

〔%〕

Thickness

〔mm〕

Part number 1

Part number 2

Note

% Rated

voltage

〔pF〕

tolerance

（P/N 1）

50V

UMK107 SD102KA

UMK107 SD122KA

UMK107 SD152KA

UMK107 SD182KA

UMK107 SD222KA

UMK107 SD272KA

UMK107 SD332KA

TMK107 SD392KA

TMK107 SD472KA

EMK107 SD562KA

EMK107 SD682KA

EMK107 SD822KA

EMK107 SD103KA

LMK107 SD123KA

LMK107 SD153KA

LMK107 SD183KA

LMK107 SD223KA

1000

1200

±10

0.1

0.8±0.1

R

200%

1500

1800

2200

2700

3300

3900

4700

25V

16V

Standard

type

5600

6800

8200

10000

12000

15000

18000

22000

10V

Note：Capacitance tolerance J (±5%) is also available. Please contact Taiyo Yuden sales channels.

●212TYPE

・1.25mm thicknes（s G）

HALT

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance Capacitance

tanδ

〔%〕

Thickness

〔mm〕

Part number 1

Part number 2

Note

% Rated

voltage

〔pF〕

tolerance

35V

10V

GMK212 SD183KG

GMK212 SD223KG

GMK212 SD273KG

LMK212 SD683KG

LMK212 SD823KG

LMK212 SD104KG

18000

22000

27000

68000

82000

100000

±10

0.1

1.25±0.1

R

200%

Standard

type

・0.85mm thicknes（s D）

HALT

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance Capacitance

tanδ

〔%〕

Thickness

〔mm〕

Part number 1

Part number 2

Note

% Rated

voltage

〔pF〕

tolerance

50V

UMK212 SD392KD

UMK212 SD472KD

UMK212 SD562KD

UMK212 SD682KD

UMK212 SD822KD

UMK212 SD103KD

GMK212 SD123KD

GMK212 SD153KD

EMK212 SD333KD

LMK212 SD473KD

3900

4700

±10

0.1

0.85±0.1

R

200%

5600

6800

8200

Standard

type

10000

12000

15000

33000

47000

35V

16V

10V

Note：Capacitance tolerance J (±5%) is also available. Please contact Taiyo Yuden sales channels.

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlcc05_e-01

23

■ REPRESENTATIVE PART NUMBERS

●316TYPE

・1.6mm thicknes（s L）

HALT

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance Capacitance

tanδ

Thickness

〔mm〕

Part number 1

Part number 2

Note

% Rated

voltage

〔pF〕

tolerance

〔%〕

TMK316 SD823KL

TMK316 SD104KL

82000

±10

0.1

1.6±0.2

R

200%

Standard

type

25V

100000

・1.15mm thicknes（s F）

HALT

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance Capacitance

tanδ

〔%〕

Thickness

〔mm〕

Part number 1

% Rated

voltage

〔pF〕

tolerance

GMK316 SD333KF

GMK316 SD393KF

TMK316 SD473KF

TMK316 SD563KF

TMK316 SD683KF

33000

39000

47000

56000

68000

±10

0.1

1.15±0.1

R

200%

35V

Standard

type

25V

Note：Capacitance tolerance J (±5%) is also available. Please contact Taiyo Yuden sales channels.

■ ELECTRICAL CHARACTERISTICS

Capacitance-temperature characteristics

■

20

15

SD : Standard Type

10

5

0

-

5

-

10

-

15

-

20

-

60

-

40 20

0

20

40 60

80 100 120

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlcc05_e-01

24

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlcc05_e-01

25

■ RELIABILITY DATA

Multilayer Ceramic Capacitors and Medium-High Voltage Multilayer Ceramic

Capacitors are noted separately.

Super Low Distortion Multilayer Ceramic Capacitors（CFCAP）

1. Operating Temperature Range

Speciﬁed Value

－55 to ＋125℃

2. Storage Temperature Range

Speciﬁed Value

－55 to ＋125℃

3. Rated Voltage

Speciﬁed Value

6.3VDC, 10VDC, 16VDC, 25VDC, 35VDC, 50VDC

No breakdown or damage

4. Dielectric Withstanding Voltage（Between terminals）

Speciﬁed Value

【Test Methods and Remarks】

Applied voltage: Rated voltage×3

Duration: 1 to 5 sec.

Charge/discharge current: 50mA max.

５．Insulation Resistance

Speciﬁed Value

10000 MΩ or 500MΩμF, whichever is smaller

【Test Methods and Remarks】

Applied voltage: Rated voltage

Duration: 60±5 sec.

Charge/discharge current: 50mA max.

6．Capacitance（Tolerance）

Speciﬁed Value

±10％

【Test Methods and Remarks】

Measuring frequency：1ｋHz±10%

Measuring voltage：1±0.2Vrms

Bias application: None

７．Dissipation Factor

Speciﬁed Value

0.1%max

【Test Methods and Remarks】

Measuring frequency：1ｋHz±10%

Measuring voltage：1±0.2Vrms

Bias application: None

8．Bending Strength

Appearance: No abnormality

Capacitance change: ±5%

Speciﬁed Value

【Test Methods and Remarks】

Warp: 1mm

Speed: 0.5mm/second

Duration:10 seconds

R-230

Test board: glass epoxy resin substrate

Thickness: 1.6mm

Capacitance measurement shall be conducted with the board bent.

ꢀ

9．Adhesive Force of Terminal Electrodes

Speciﬁed Value

Terminal electrodes shall be no exfoliation or a sign of exfoliation.

【Test Methods and Remarks】

Applied force: 5N

Duration: 30 ±5 seconds

10．Solderability

Speciﬁed Value

At least 95% of terminal electrode is covered by new solder.

【Test Methods and Remarks】

Solder type

H60A or H63A

Solder temperature

Duration

Eutectic solder

230±5℃

245±3℃

4±1 sec.

Lead-free solder Snー3.0Agー0.5Cu

11．Resistance to Soldering Heat

Appearance: No abnormality

Capacitance change: ±2.5% max.

Dissipation factor : Initial value

Speciﬁed Value

Insulation resistance: Initial value

Withstanding voltage（between terminals）: No abnormality

【Test Methods and Remarks】

Solder temp.: 270 ±5℃

Duration: 3 ±0.5 sec.

Preheating conditions：80 to 100℃, 2 to 5 min. or 5 to 10 min.

150 to 200℃, 2 to 5 min. or 5 to 10 min.

Measurement shall be conducted : 24±2hrs under the standard condition

Note1

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlcc05_reli_e-01

mlcc05_reli-R1

■ RELIABILITY DATA

12．Temperature Cycle（Thermal Shock）

Appearance: No abnormality

Capacitance change: ±2.5% max

Dissipation factor : Initial value

Speciﬁed Value

Insulation resistance: Initial value

Withstanding voltage（between terminals）: No abnormality

【Test Methods and Remarks】

＋0

Conditions for 1 cycle／ Step 1: Minimum operating temperature

℃

30±3 min.

－3

Step 2: Normal temperature

Step 3: Maximum operating temperature

Step 4: Normal temperature

2 to 3 min.

＋0

－3

℃

30±3 min.

2 to 3 min.

Number of cycles: 5 times

Measurement shall be conducted : 24±2hrs under the standard condition

Note1

13．Humidity（Steady state）

Appearance: No abnormality

Capacitance change: ±5% max

Dissipation factor : 0.5% max

Speciﬁed Value

Insulation resistance 50MΩμF or 1000MΩ, whichever is smaller

【Test Methods and Remarks】

Temperature:40±2℃

Humidity:90 to 95% RH

＋24

Duration:500

hrs

－0

Measurement shall be conducted : 24 ±2hrs under the standard condition

Note1

14．Humidity Loading

Appearance: No abnormality

Capacitance change: ±7.5% max

Dissipation factor : 0.5% max

Speciﬁed Value

Insulation resistance: 25MΩμF or 500MΩ, whichever is smaller

【Test Methods and Remarks】

According to JIS C 5102 clause 9.9.

Temperature:40±2℃ꢀHumidity:90 to 95% RH

＋24

Duration:500

hrs

－0

Applied voltage: Rated voltage

Charge/discharge current:50mA max

Measurement shall be conducted : 24 ±2hrs under the standard condition

Note1

15．High Temperature Loading

Appearance: No abnormality

Capacitance change: ±3% max

Dissipation factor : 0.35% max

Speciﬁed Value

Insulation resistance: 50MΩμF or 1000MΩ, whichever is smaller

【Test Methods and Remarks】

According to JIS C 5102 clause 9.10.

Temperature:125±3℃

＋48

Duration:1000

hrs

－0

Applied voltage: Rated voltage x 2

Charge/discharge current:50mA max

Measurement shall be conducted : 24 ±2hrs under the standard condition Note1

Note1

Standard condition: Temperature: 5 to 35℃, Relative humidity: 45 to 85 % RH, Air pressure: 86 to 106kPa

When there are questions concerning measurement results, in order to provide correlation data, the test shall be conducted under the following condition.

Temperature: 20±2℃, Relative humidity: 60 to 70 % RH, Air pressure: 86 to 106kPa

Unless otherwise speciﬁed, all the tests are conducted under the "standard condition".

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlcc05_reli_e-01

mlcc05_reli-R2

MEDIUM-HIGH VOLTAGE MULTILAYER CERAMIC CAPACITORS

REFLOW

■ FEATURES

■ APPLICATIONS

◦ꢁThe use of nickel as electrode material prevents migration and pro-

◦Gꢁ eneral telephone exchange

◦Iꢁnverter

vides high reliability.

◦ꢁSmall case sizes with high rated voltage.

◦Wꢁ ireless and Telecommunication base

◦Fꢁ or DC/DC Converter

■ PART NUMBER

H M K 3 1 6 △ B J 1 0 4 K L － T △

❶

❷

❸

❹

❺

❻

❼

❽

❾

❿

⓫

⓬

❻Temperature

❹Dimension

⓬Internal code

Standard

△＝Blank space

❾Thickness

〔mm〕

❿Special code

❶Rated

❽Special code

❸End

characteristics code

voltage〔VDC〕

Type （inch） L×W［mm］

107 （0603） 1.6×0.8

212 （0805） 2.0×1.25

316 （1206） 3.2×1.6

325 （1210） 3.2×2.5

432 （1812） 4.5×3.2

termination

Plated

△

－

Standard

K

±10%

±20%

B

X5R

BJ

A

0.8

0.85

1.25

1.15

1.6

H

Q

S

100

250

630

K

M

D

G

F

C7

B7

X7S

X7R

⓫Packaging

❷Series name

Multilayer ceramic

capacitor

φ178mm Taping

（4mm pitch）

T

❼Nominal

capacitance〔pF〕

M

❺Dimension

tolerance

L

N

M

1.9

example

104

105

△

Standard

2.5

100,000

△＝Blank space

1,000,000

■ STANDARD EXTERNAL DIMENSIONS/STANDARD QUANTITY

Dimension [mm]

Standard quantity [pcs]

Paper tape Embossed tape

Type

L

W

T

e

□MK107

1.6±0.10

0.8±0.10

1.25±0.10

1.6±0.15

2.5±0.20

3.2±0.30

0.8±0.10

A

0.35±0.25

0.5±0.25

4000

－

（0603 inch）

0.85±0.10

1.25±0.10

1.15±0.10

1.6±0.20

1.15±0.10

1.9±0.20

D

G

F

4000

－

□MK212

（0805 inch）

2.0±0.10

3.2±0.15

3.2±0.3

4.5±0.4

－

3000

2000

□MK316

（1206 inch）

0.5 ＋0.35/ー0.25

0.6±0.3

－

L

F

□MK325

（1210 inch）

2000

500

N

□MK432

（1812 inch）

2.5±0.20

M

0.9±0.6

■ AVAILABLE CAPACITANCE RANGE

107

212

316

325

432

Type

X7R X7S B/X5R

X7R

B/X5R

X7R

B/X5R

X7R

B/X5R

X7R

B/X5R

Cap

[μF]

VDC

[3-digit]

102

152

222

332

472

682

103

153

223

333

473

683

104

154

224

334

474

100 100 100 100 250 100 250 100 250 630 100 250 630 100 250 630 100 250 630 100 250 630 100 250 630

0.001

0.0015

0.0022

0.0033

0.0047

0.0068

0.01

0.015

0.022

0.033

0.047

0.068

0.1

0.15

0.22

0.33

0.47

0.68

1.0

1.5

2.2

A

D

G

D

G

F

L

F

L

G

N

L

N

M

A

F

N

F

N

M

G

M

684

105

155

225

L

M

N

※Letters in the table indicate thickness.

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlcc06_e-01

26

■ AVAILABLE CAPACITANCE RANGE

Temperature characteristics

Temperature range〔℃〕

－25～＋85

Capacitance tolerance

Temp.char.Code

〔％〕

Applicable standard

Ref. Temp〔. ℃〕

Capacitance chang〔e ％〕

JIS

B

20

25

±10

±15

±22

±15

BJ

EIA

X5R

X7S

X7R

－55～＋85

－55～＋125

±10（K）

±20（M）

C7

B7

EIA

■ REPRESENTATIVE PART NUMBERS

●107TYPE

【Temperature Characteristic BJ:B/X5R】

HALT

Capacitance

tolerance

〔%〕

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance

〔pF〕

tanδ

〔%〕

Thickness

〔mm〕

Part number 1

Part number 2

Note

% Rated

voltage

100V

HMK107 BJ102□A

HMK107 BJ152□A

HMK107 BJ222□A

HMK107 BJ332□A

HMK107 BJ472□A

HMK107 BJ682□A

HMK107 BJ103□A

HMK107 BJ153□A

HMK107 BJ223□A

HMK107 BJ333□A

HMK107 BJ104□A

B/X5R*¹

1000

1500

±10, ±20

3.5

0.8±0.1

R

200%

2200

3300

4700

6800

10000

15000

22000

33000

100000

Capacitance tolerance code is applied to □ of part number.

*1ꢀWe may provide X7R for some itemes according to the individual speciﬁcation.

【Temperature CharacteristicꢀB7：X7R, C7：X7S】

HALT

Capacitance

tolerance

〔%〕

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance

〔pF〕

tanδ

〔%〕

Thickness

〔mm〕

Part number 1

Part number 2

Note

% Rated

voltage

100V

HMK107 B7102□A

HMK107 B7152□A

HMK107 B7222□A

HMK107 B7332□A

HMK107 B7472□A

HMK107 B7682□A

HMK107 B7103□A

HMK107 B7153□A

HMK107 B7223□A

HMK107 B7333□A

HMK107 C7104□A

X7R

X7S

1000

1500

±10, ±20

3.5

0.8±0.1

R

200%

2200

3300

4700

6800

10000

15000

22000

33000

100000

Capacitance tolerance code is applied to □ of part number.

●212TYPE

【Temperature CharacteristicꢀBJ：B/X5R】

・1.25mm thicknes（s G）

HALT

Capacitance

tolerance

〔%〕

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance

〔pF〕

tanδ

〔%〕

Thickness

〔mm〕

Part number 1

Part number 2

Note

% Rated

voltage

100V

HMK212 BJ103□G

HMK212 BJ153□G

HMK212 BJ223□G

HMK212 BJ333□G

HMK212 BJ473□G

HMK212 BJ683□G

HMK212 BJ104□G

HMK212 BJ224□G

QMK212 BJ472□G

QMK212 BJ682□G

QMK212 BJ103□G

QMK212 BJ153□G

QMK212 BJ223□G

B/X5R*¹

10000

15000

22000

33000

47000

68000

100000

220000

4700

±10, ±20

3.5

2.5

1.25±0.1

R

200%

150%

250V

6800

10000

15000

22000

・0.85mm thicknes（s D）

HALT

Capacitance

tolerance

〔%〕

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance

〔pF〕

tanδ

〔%〕

Thickness

〔mm〕

Part number 1

Part number 2

Note

% Rated

voltage

250V

QMK212 BJ102□D

QMK212 BJ152□D

QMK212 BJ222□D

QMK212 BJ332□D

B/X5R*¹

1000

1500

2200

3300

±10, ±20

2.5

0.85±0.1

R

150%

Capacitance tolerance code is applied to □ of part number.

*1ꢀWe may provide X7R for some itemes according to the individual speciﬁcation.

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlcc06_e-01

27

■ REPRESENTATIVE PART NUMBERS

【Temperature CharacteristicꢀB7：X7R】

・1.25mm thicknes（s G）

HALT

Capacitance

tolerance

〔%〕

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance

〔pF〕

tanδ

〔%〕

Thickness

〔mm〕

Part number 1

Part number 2

Note

% Rated

voltage

100V

HMK212 B7103□G

HMK212 B7153□G

HMK212 B7223□G

HMK212 B7333□G

HMK212 B7473□G

HMK212 B7683□G

HMK212 B7104□G

HMK212 B7224□G

QMK212 B7472□G

QMK212 B7682□G

QMK212 B7103□G

QMK212 B7153□G

QMK212 B7223□G

X7R

10000

15000

22000

33000

47000

68000

100000

220000

4700

±10, ±20

3.5

2.5

1.25±0.1

R

200%

150%

250V

6800

10000

15000

22000

・0.85mm thicknes（s D）

HALT

Capacitance

tolerance

〔%〕

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance

〔pF〕

tanδ

〔%〕

Thickness

〔mm〕

Part number 1

Part number 2

Note

% Rated

voltage

250V

QMK212 B7102□D

QMK212 B7152□D

QMK212 B7222□D

QMK212 B7332□D

X7R

1000

1500

2200

3300

±10, ±20

2.5

0.85±0.1

R

150%

Capacitance tolerance code is applied to □ of part number.

●316TYPE

【Temperature CharacteristicꢀBJ：B/X5R】

・1.6mm thicknes（s L）

HALT

Capacitance

tolerance

〔%〕

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance

〔pF〕

tanδ

〔%〕

Thickness

〔mm〕

Part number 1

Part number 2

Note

% Rated

voltage

100V

HMK316 BJ473□L

HMK316 BJ683□L

HMK316 BJ104□L

HMK316 BJ154□L

HMK316 BJ224□L

HMK316 BJ334□L

HMK316 BJ474□L

HMK316 BJ105□L

QMK316 BJ333□L

QMK316 BJ473□L

QMK316 BJ683□L

QMK316 BJ104□L

SMK316 BJ153□L

SMK316 BJ223□L

B/X5R*¹

47000

68000

±10, ±20

3.5

2.5

1.6±0.2

R

200%

150%

120%

100000

150000

220000

330000

470000

1000000

33000

250V

630V

47000

68000

100000

15000

22000

・1.15mm thicknes（s F）

HALT

Capacitance

tolerance

〔%〕

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance

〔pF〕

tanδ

〔%〕

Thickness

〔mm〕

Part number 1

Part number 2

Note

% Rated

voltage

630V

SMK316 BJ102□F

SMK316 BJ152□F

SMK316 BJ222□F

SMK316 BJ332□F

SMK316 BJ472□F

SMK316 BJ682□F

SMK316 BJ103□F

B/X5R*¹

1000

1500

2200

3300

4700

6800

10000

±10, ±20

2.5

1.15±0.1

R

120%

Capacitance tolerance code is applied to □ of part number.

*1ꢀWe may provide X7R for some itemes according to the individual speciﬁcation.

【Temperature CharacteristicꢀB7：X7R】

・1.6mm thicknes（s L）

HALT

Capacitance

tolerance

〔%〕

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance

〔pF〕

tanδ

〔%〕

Thickness

〔mm〕

Part number 1

Part number 2

Note

% Rated

voltage

100V

HMK316 B7473□L

HMK316 B7683□L

HMK316 B7104□L

HMK316 B7154□L

HMK316 B7224□L

HMK316 B7334□L

HMK316 B7474□L

HMK316 B7105□L

QMK316 B7333□L

QMK316 B7473□L

QMK316 B7683□L

QMK316 B7104□L

SMK316 B7153□L

SMK316 B7223□L

X7R

47000

68000

±10, ±20

3.5

2.5

1.6±0.2

R

200%

150%

120%

100000

150000

220000

330000

470000

1000000

33000

250V

630V

47000

68000

100000

15000

22000

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlcc06_e-01

28

■ REPRESENTATIVE PART NUMBERS

・1.15mm thicknes（s F）

HALT

Capacitance

tolerance

〔%〕

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance

〔pF〕

tanδ

〔%〕

Thickness

〔mm〕

Part number 1

Part number 2

Note

% Rated

voltage

630V

SMK316 B7102□F

SMK316 B7152□F

SMK316 B7222□F

SMK316 B7332□F

SMK316 B7472□F

SMK316 B7682□F

SMK316 B7103□F

X7R

1000

1500

2200

3300

4700

6800

10000

±10, ±20

2.5

1.15±0.1

R

120%

Capacitance tolerance code is applied to □ of part number.

●325TYPE

【Temperature CharacteristicꢀBJ：B/X5R】

・1.9mm thicknes（s N）

HALT

Capacitance

tolerance

〔%〕

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance

〔pF〕

tanδ

〔%〕

Thickness

〔mm〕

Part number 1

Part number 2

Note

% Rated

voltage

100V

HMK325 BJ154□N

HMK325 BJ224□N

HMK325 BJ334□N

HMK325 BJ474□N

HMK325 BJ684□N

HMK325 BJ105□N

HMK325 BJ225□N

QMK325 BJ473□N

QMK325 BJ104□N

QMK325 BJ154□N

QMK325 BJ224□N

SMK325 BJ223□N

SMK325 BJ333□N

SMK325 BJ473□N

B/X5R*¹

150000

220000

330000

470000

680000

1000000

2200000

47000

±10, ±20

3.5

2.5

1.9±0.2

R

200%

150%

120%

250V

630V

100000

150000

220000

22000

33000

47000

・1.15mm thicknes（s F）

HALT

Capacitance

tolerance

〔%〕

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance

〔pF〕

tanδ

Thickness

〔mm〕

Part number 1

HMK325 BJ104□F

Part number 2

Note

% Rated

voltage

〔%〕

100V

B/X5R*¹

100000

±10, ±20

3.5

1.15±0.1

R

200%

Capacitance tolerance code is applied to □ of part number.

*1ꢀWe may provide X7R for some itemes according to the individual speciﬁcation.

【Temperature CharacteristicꢀB7：X7R】

・1.9mm thicknes（s N）

HALT

Capacitance

tolerance

〔%〕

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance

〔pF〕

tanδ

〔%〕

Thickness

〔mm〕

Part number 1

Part number 2

Note

% Rated

voltage

100V

HMK325 B7154□N

HMK325 B7224□N

HMK325 B7334□N

HMK325 B7474□N

HMK325 B7684□N

HMK325 B7105□N

HMK325 B7225□N

QMK325 B7473□N

QMK325 B7104□N

QMK325 B7154□N

QMK325 B7224□N

SMK325 B7223□N

SMK325 B7333□N

SMK325 B7473□N

X7R

150000

220000

330000

470000

680000

1000000

2200000

47000

±10, ±20

3.5

2.5

1.9±0.2

R

200%

150%

120%

250V

630V

100000

150000

220000

22000

33000

47000

・1.15mm thicknes（s F）

HALT

Capacitance

tolerance

〔%〕

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance

〔pF〕

tanδ

〔%〕

Thickness

〔mm〕

Part number 1

Part number 2

Note

% Rated

voltage

100V

HMK325 B7104□F

X7R

100000

±10, ±20

3.5

1.15±0.1

R

200%

Capacitance tolerance code is applied to □ of part number.

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlcc06_e-01

29

■ REPRESENTATIVE PART NUMBERS

●432TYPE

【Temperature CharacteristicꢀBJ：B/X5R】

HALT

Capacitance

tolerance

〔%〕

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance

〔pF〕

tanδ

〔%〕

Thickness

〔mm〕

Part number 1

Part number 2

Note

% Rated

voltage

100V

HMK432 BJ474□M

HMK432 BJ105□M

HMK432 BJ155□M

HMK432 BJ225□M

QMK432 BJ104□M

QMK432 BJ224□M

QMK432 BJ334□M

QMK432 BJ474□M

SMK432 BJ473□M

SMK432 BJ683□M

SMK432 BJ104□M

B/X5R*¹

470000

1000000

1500000

2200000

100000

220000

330000

470000

47000

±10, ±20

3.5

2.5

2.5±0.2

R

200%

150%

120%

250V

630V

68000

100000

Capacitance tolerance code is applied to □ of part number.

*1ꢀWe may provide X7R for some itemes according to the individual speciﬁcation.

【Temperature CharacteristicꢀB7：X7R】

HALT

Capacitance

tolerance

〔%〕

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance

〔pF〕

tanδ

〔%〕

Thickness

〔mm〕

Part number 1

Part number 2

Note

% Rated

voltage

100V

250V

630V

HMK432 B7474□M

HMK432 B7105□M

HMK432 B7155□M

HMK432 B7225□M

QMK432 B7104□M

QMK432 B7224□M

QMK432 B7334□M

QMK432 B7474□M

SMK432 B7473□M

SMK432 B7683□M

SMK432 B7104□M

X7R

470000

1000000

1500000

2200000

100000

220000

330000

470000

47000

±10, ±20

3.5

2.5

2.5±0.2

R

200%

150%

120%

68000

100000

Capacitance tolerance code is applied to □ of part number.

■ ELECTRICAL CHARACTERISTICS

●Example of Impedance ESR vs. Frequency characteristics

Taiyo Yuden medium-high voltage ceramic capacitor

■

HMK212 BJ104KG / HMK212 B7104KG

SMK316 BJ223KL / SMK316 B7223KL

QMK325 BJ224KN / QMK325 B7224KN

HMK325 BJ105KN / HMK325 B7105KN

SMK432 BJ104KM / SMK432 B7104KM

QMK432 BJ474KM / QMK432 B7474KM

●Temperature characteristics

HMK325 BJ105KN / HMK325 B7105KN

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlcc06_e-01

30

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlcc06_e-01

31

■ RELIABILITY DATA

Multilayer Ceramic Capacitors and Super Low Distortion Multilayer Ceramic

Capacitors are noted separately.

MediumーHigh Voltage Multilayer Ceramic Capacitor

1. Operating Temperature Range

Speciﬁed Value

X7R, X7S：－55～＋125℃ X5R：－55～＋85℃ B：－25～＋85℃

2. Storage Temperature Range

Speciﬁed Value

X7R, X7S：－55～＋125℃ X5R：－55～＋85℃ B：－25～＋85℃

100VDC, 250VDC, 630VDC

3. Rated Voltage

Speciﬁed Value

4. Withstanding Voltage（Between terminals）

Speciﬁed Value

No breakdown or damage

【Test Methods and Remarks】

Applied voltage:Rated voltage×2.5（HMK）, Rated voltage×2（QMK）, Rated voltage×1.2（SMK）

Duration：1 to 5sec.

Charge/discharge current：50mA max.

５．Insulation Resistance

Speciﬁed Value

100MΩμF or 10GΩ, whichever is smaller.

【Test Methods and Remarks】

Applied voltage:Rated voltage（HMK, QMK）, 500V（SMK）

Duration：60±5sec.

Charge/discharge current：50mA max.

6．Capacitance（Tolerance）

Speciﬁed Value

±10％、±20％

【Test Methods and Remarks】

Measuring frequency:1kHz±10%

Measuring voltage:1±0.2Vrms

Bias application:None

７．Dissipation Factor

3.5%ma（x HMK）

2.5%ma（x QMK, SMK）

Speciﬁed Value

【Test Methods and Remarks】

Measuring frequency:1kHz±10%

Measuring voltage:1±0.2Vrms

Bias application:None

8．Temperature Characteristic of Capacitance

Speciﬁed Value

B： ±10％（－25～＋85℃）

X5R：±15％（－55～＋85℃）

X7R：±15％（－55～＋125℃）

X7S：±22％（－55～＋125℃）

【Test Methods and Remarks】

Capacitance value at each step shall be measured in thermal equilibrium, and the temperature characteristic shall be calculated from the following equation.

（C－C₂）

Step

B

X5R、X7R、X7S

Minimum operating temperature

20℃ 25℃

Maximum operating temperature

×100（％）

ꢀC₂

1

2

3

C

：Capacitance value in Step 1 or Step 3

C₂：Capacitance value in Step 2

9．Deﬂection

Appearance:No abnormality

Capacitance change:Within±10%

Speciﬁed Value

【Test Methods and Remarks】

Warp:1mm

Duration:10sec.

R-230

Test board:glass epoxy-resin substrate

Thickness:1.6mm

Capacitance measurement shall be conducted with the board bent.

10．Adhesive Strength of Terminal Electrodes

Speciﬁed Value

No terminal separation or its indication.

【Test Methods and Remarks】

Applied force:5N

Duration:30±5sec.

ꢀꢀꢀ

11．Solderability

Speciﬁed Value

At least 95% of terminal electrode is covered by new solder

【Test Methods and Remarks】

Solder type

H60A or H63A

Lead-free solder Snー3.0Agー0.5Cu

Solder temperature

Duration

Eutectic solder

230±5℃

245±3℃

4±1 sec.

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlcc06_reli_e-01

mlcc06_reli-R1

■ RELIABILITY DATA

12．Resistance to Soldering

Appearance:

No abnormality

Capacitance change:

Dissipation factor :

Insulation resistance:

Within±15%（HMK）, ±10%（QMK, SMK）

Initial value

Speciﬁed Value

Withstanding voltage（between terminals）: No abnormality

【Test Methods and Remarks】

Preconditioning:Thermal treatmen（t at 150℃ for 1hr） Note1

Solder temperature:270±5℃

Duration:3±0.5sec.

Preheating conditions: 80 to 100℃, 2 to 5 min.

150 to 200℃, 2 to 5min.

Recovery : 24±2hrs under the standard condition Note3

13．Temperature Cycle（Thermal Shock）

Appearance:

Capacitance change: Within±15%（HMK）, ±7.5%（QMK, SMK）

Dissipation factor: Initial value

No abnormality

Speciﬁed Value

Insulation resistance: Initial value

【Test Methods and Remarks】

Preconditioning:Thermal treatmen（t at 150℃ for 1hr） Note1

＋0

Conditions for 1 cycle／ Step 1: Minimum operating temperature

℃ 30±3min.

－3

Step 2: Normal temperature

Step 3: Maximum operating temperature

Step 4: Normal temperature

2 to 3min.

＋0

－3

℃ 30±3min.

2 to 3min.

Number of cycles:5 times

Recovery : 24±2hrs under the standard condition Note3

14．Humidit（y Steady state）

Appearance:

No abnormality

Capacitance change: Within±15%

Speciﬁed Value

Dissipation factor :

7%ma（x HMK）, 5%ma（x QMK, SMK）.

Insulation resistance: 25MΩμF or 1000MΩ, whichever is smaller.

【Test Methods and Remarks】

Preconditioning:Thermal treatmen（t at 150℃ for 1hr） Note1

Temperature:40±2℃

Humidity：90 to 95%RH

＋24

Duration: 500

hrs

－0

Recovery : 24±2hrs under the standard condition Note3

15．Humidity Loading

Appearance:

No abnormality

Capacitance change: Within±15%

Speciﬁed Value

Dissipation factor:

7%ma（x HMK）, 5%ma（x QMK, SMK）.

Insulation resistance: 10MΩμF or 500MΩ, whichever is smaller.

【Test Methods and Remarks】

According to JIS 5102 clause 9.9.

Preconditioning:Voltage treatment Note2

Temperature:40±2℃

Humidity：90 to 95%RH

Applied voltage:Rated voltage

Charge/discharge current：50mA max.

＋24

Duration: 500

hrs

－0

Recovery : 24±2hrs under the standard condition Note3

16．High Temperature Loading

Appearance:

No abnormality

Capacitance change: Within±15%

Speciﬁed Value

Dissipation factor:

7%ma（x HMK）, 5%ma（x QMK, SMK）.

Insulation resistance: 50MΩμF or 1000MΩ, whichever is smaller.

【Test Methods and Remarks】

According to JIS 5102 clause 9.10.

Preconditioning:Voltage treatment Note2

Temperature:125±3℃（B7, C7）, 85±2℃（BJ）

Applied voltage:Rated voltage×2（HMK）

Rated voltage×1.5（QMK）

Rated voltage×1.2（SMK）

Charge/discharge current：50mA max.

＋24

Duration: 1000

hrs

－0

Recovery : 24±2hrs under the standard condition Note3

Note1 Thermal treatment : Initial value shall be measured after test sample is heat-treated at 150＋0/－10℃ for an hour and kept at room temperature for 24±2hours.

Note2 Voltage treatment : Initial value shall be measured after test sample is voltage-treated for an hour at both the temperature and voltage speciﬁed in the test conditions, and

kept at room temperature for 24±2hours.

Note3 Standard condition: Temperature: 5 to 35℃, Relative humidity: 45 to 85 % RH, Air pressure: 86 to 106kPa

When there are questions concerning measurement results, in order to provide correlation data, the test shall be conducted under the following condi-

tion.

Temperature: 20±2℃, Relative humidity: 60 to 70 % RH, Air pressure: 86 to 106kPa

Unless otherwise speciﬁed, all the tests are conducted under the "standard condition".

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlcc06_reli_e-01

mlcc06_reli-R2

LW REVERSAL DECOUPLING CAPACITORS（）

LWDC^TM

REFLOW

■ FEATURES

■ APPLICATIONS

◦ꢁLow equivalent series resistance（ESR）.

◦ꢁLow equivalent series inductor（ESL）.

◦ꢁThe effect of noise removal in the high frequency.

◦ꢁDecreased ripple voltage.

◦Dꢁ ecoupling capacitors

◦Fꢁ iltering capacitors

◦ꢁSmall size with high capacitance.

■ PART NUMBER

J W K 2 1 2 △ B J 1 0 6 M D － T △

❶

❷

❸

❹

❺

❻

❼

❽

❾

❿

⓫

⓬

⓬Internal code

❿Special code

Standard

❽Capacitance

❾Thickness

〔mm〕

❹Dimension

❶Rated

❸End

❻Temperature

characteristics

code

tolerance

voltage〔VDC〕

A

termination

△

Standard

－

Type （inch） L×W〔mm〕

105 （0204） 0.52×1.0

107 （0306） 0.8×1.6

212 （0508） 1.25×2.0

K

±10%

±20%

P

0.3

4

K

Plated

△＝Blank space

B

BJ

M

V

0.5

J

6.3

10

16

25

⓫Packaging

X5R

D

0.85

L

E

T

φ178mm Taping

（2mm pitch）

0204 Type

C6

C7

B7

X6S

X7S

X7R

❼Nominal capacitance

〔μF〕

example

F

T

❷Series name

LW Reverse Type

❺Dimension tolerance

Taping

W

△

Standard

φ178mm

105

106

1.0

pitch

（4mm

）

△＝Blank space

10.0

0306, 0508

Type

■ STANDARD EXTERNAL DIMENSIONS/STANDARD QUANTITY

Dimension [mm]

W

Standard quantity [pcs]

Type

L

T

Paper tape

Embossed tape

0.30±0.05

0.50±0.05

P

□WK105

0.52±0.05

1.00±0.05

1.60±0.10

2.00±0.15

10000

－

（0204 inch）

V

□WK107

（0306 inch）

□WK212

（0508 inch）

0.80±0.10

1.25±0.15

0.50±0.05

0.85±0.10

V

－

4000

D

4000

－

■ AVAILABLE CAPACITANCE RANGE

105

107

212

Type

X7S

6.3

X6S

6.3

X5R

10

X7R

16

X7S

X6S

4

X5R

X6S

X5R

6.3

Cap

[μF]

VDC

[3-digit]

104

10

P

4

16

P

10

P

4

25

P

16

P

6.3

P

4

25

V

6.3

4

V

25

V

16

10

6.3 6.3

4

10

0.10

0.22

0.47

1.0

P

224

P

V

474

P

V

P

V

P

105

P,V

V

2.2

4.7

225

475

V

D

10

106

22

226

D

※Letters in the table indicate thickness.

Temperature characteristics

Temperature range〔℃〕

－25～＋85

Capacitance tolerance

Temp.char.Code

〔％〕

Applicable standard

Ref. Temp〔. ℃〕

Capacitance change〔％〕

JIS

B

20

25

±10

±15

±22

±15

BJ

EIA

X5R

X6S

X7S

X7R

－55～＋85

－55～＋105

－55～＋125

±10（K）

±20（M）

C6

C7

B7

EIA

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlcc07_e-01

32

■ REPRESENTATIVE PART NUMBERS

●105TYPE（0204 case size）

【Temperature Characteristic BJ:X5R】

・0.5mm thicknes（s V）

HALT

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance Capacitance

tanδ

Thickness

〔mm〕

Part number 1

Part number 2

Note

% Rated

voltage

〔μF〕

tolerance

〔%〕

10V

LWK105 BJ105MV

JWK105 BJ105MV

X5R

X5R*¹

1

±20

10

0.5±0.05

R

150%

6.3V

・0.3mm thicknes（s P）

HALT

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance Capacitance

tanδ

〔%〕

Thickness

〔mm〕

Part number 1

% Rated

voltage

〔μF〕

tolerance

25V

16V

10V

6.3V

TWK105 BJ104MP

EWK105 BJ224MP

LWK105 BJ474MP

JWK105 BJ104MP

JWK105 BJ474MP

JWK105 BJ105MP

AWK105 BJ224MP

X5R

0.1

0.22

0.47

0.1

±20

5

0.3±0.05

R

150%

10

5

X5R

X5R*¹

X5R

0.47

1

10

4V

X5R*¹

0.22

*1ꢀWe may provide X6S/X7S for some itemes according to the individual speciﬁcation.

【Temperature Characteristic C6:X6S C7:X7S】

・0.5mm thicknes（s V）

HALT

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance Capacitance

tanδ

〔%〕

Thickness

〔mm〕

Part number 1

Part number 2

Note

% Rated

voltage

〔μF〕

tolerance

6.3V

4V

JWK105 C6105MV

AWK105 C6105MV

X6S

1

±20

10

0.5±0.05

R

150%

・0.3mm thicknes（s P）

HALT

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance Capacitance

〔μF〕

tanδ

〔%〕

Thickness

〔mm〕

Part number 1

Part number 2

% Rated

voltage

tolerance

16V

10V

EWK105 C6104MP

LWK105 C7104MP

LWK105 C6224MP

JWK105 C7104MP

JWK105 C7224MP

JWK105 C6474MP

AWK105 C6224MP

AWK105 C6474MP

AWK105 C6105MP

X6S

X7S

X6S

X7S

X6S

0.1

±20

5

0.3±0.05

R

150%

10

5

0.22

0.1

6.3V

4V

0.22

0.47

0.22

0.47

1

10

●107TYPE（0306 case size）

【Temperature Characteristic BJ:X5R】

HALT

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

Temp.

char.

Capacitance Capacitance

tanδ

〔%〕

Thickness

〔mm〕

Part number 1

voltage

Part number 2

Note

% Rated

voltage

〔μF〕

tolerance

25V

16V

TWK107 BJ104MV

EWK107 BJ224MV

EWK107 BJ474MV

LWK107 BJ105MV

LWK107 BJ225MV

JWK107 BJ105MV

JWK107 BJ225MV

JWK107 BJ475MV

X5R

X5R*¹

X5R

0.1

0.22

0.47

1

±20

5

0.5±0.05

R

150%

5

10V

10

2.2

1

6.3V

2.2

4.7

*1ꢀWe may provide X7R/X7S for some itemes according to the individual speciﬁcation.

【Temperature Characteristic B7:X7R C7:X7S C6:X6S】

HALT

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance Capacitance

tanδ

〔%〕

Thickness

〔mm〕

Part number 1

Part number 2

Note

% Rated

voltage

〔μF〕

tolerance

25V

16V

TWK107 B7104MV

EWK107 B7224MV

EWK107 B7474MV

JWK107 C7105MV

AWK107 C7225MV

AWK107 C6475MV

X7R

X7S

X6S

0.1

0.22

0.47

1

±20

5

0.5±0.05

R

150%

5

6.3V

4V

10

2.2

4.7

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlcc07_e-01

33

■ REPRESENTATIVE PART NUMBERS

●212TYPE（0508 case size）

【Temperature Characteristic BJ:X5R】

HALT

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance Capacitance

tanδ

〔%〕

Thickness

〔mm〕

Part number 1

Part number 2

Note

% Rated

voltage

〔μF〕

tolerance

10V

LWK212 BJ475□D

LWK212 BJ106MD

JWK212 BJ226MD

X5R

4.7

10

±10, ±20

±20

10

0.85±0.1

R

150%

6.3V

22

Capacitance tolerance code is applied to □ of part number.

【Temperature Characteristic C6:X6S】

HALT

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance Capacitance

tanδ

〔%〕

Thickness

〔mm〕

Part number 1

Part number 2

Note

% Rated

voltage

〔μF〕

tolerance

6.3V

JWK212 C6475□D

JWK212 C6106MD

AWK212 C6226MD

X6S

4.7

10

±10, ±20

±20

10

0.85±0.1

R

150%

4V

22

Capacitance tolerance code is applied to □ of part number.

■ ELECTRICAL CHARACTERISTICS

●Example of Impedance ESR vs. Frequency characteristics

Taiyo Yuden multilayer ceramic capacitor

■

ＪWK105 BJ105MP

ＪWK107 BJ475MV

ＪWK212 BJ226MD

Z

M

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlcc07_e-01

34

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlcc07_e-01

35

ARRAY TYPE MULTILAYER CERAMIC CAPACITORS

REFLOW

■ FEATURES

■ APPLICATIONS

◦ꢁHigh density and high efﬁciency mounting.

◦Gꢁ eneral electronic equipment

◦ꢁInternal electrodes are composed of nickel for improved cost perfor-

mance and reliability.

◦Cꢁ ommunication equipment (cellular phone, wireless applications,

etc.)

■ PART NUMBER

E 4 K 2 1 2 △ B J 1 0 4 M D － T △

❶

❷

❸

❹

❺

❻

❼

❽

❾

❿

⓫

⓬

❿Special code

⓬Internal code

Standard

△＝Blank space

❾Thickness

〔mm〕

❽Capacitance

❸End

❻Temperature

characteristics

code

❶Rated

❹Dimension

tolerance

termination

Plated

－

Standard

△

voltage〔VDC〕

A

Type （inch） L×W［mm］

096 （0302） 0.9×0.6

110 （0504） 1.37×1.0

212 （0805） 2.0×1.25

P

0.3

0.45

0.5

F

K

±1pF

±10%

±20%

K

4

B

BJ

K

V

B

A

D

J

6.3

10

16

25

50

⓫Packaging

X5R

M

L

E

T

U

φ178mm Taping

（4mm pitch）

0504, 0805 Type

B7

X7R

CH

C0H

0.6

❼Nominal capacitance

〔pF〕

example

T

F

0.8

❷Series name

2 circuits

multilayer capacitor

❺Dimension tolerance

CH

0.85

Taping

△

Standard

φ178mm

2

4

pitch

（2mm

）

104

105

100,000

△＝Blank space

4 circuits

multilayer capacitor

0302 Type

1,000,000

■ STANDARD EXTERNAL DIMENSIONS/STANDARD QUANTITY

Dimension [mm]

E2

Standard quantity [pcs]

E2

W

L

Type

Embossed

Paper tape

L

W

E1

P

T

tape

T

P

K

V

B

A

0.30±0.03

0.45±0.05

0.50±0.05

0.60±0.06

0.80±0.08

□2K096

0.9±0.05

0.6±0.05

0.23±0.10

0.36±0.10

0.125±0.075

0.45±0.05

0.64±0.10

10000

4000

－

（0302 inch）

E1

□2K110

（0504 inch）

P

1.37±0.07

1.00±0.08

0.2±0.10

W

□2K212

L

E2

T

2.00±0.10

1.25±0.10

0.50±0.20

0.25±0.10

0.25±0.15

1.00±0.10

0.50±0.10

D

0.85±0.10

4000

－

（0805 inch）

□4K212

（0805 inch）

E1

P

■ AVAILABLE CAPACITANCE RANGE

BJ/B7

CH

096ꢀ2 circuits

110ꢀ2 circuits

212ꢀ2 circuits

212ꢀ4circuits

□4K212

096

110

□2K096

□2K110

□2K212

2 circuits 2 circuits

□2K096 □2K110

CH

Type

Cap

[μF]

B/X5R

X5R

X7R

B/X5R

X5R

B/X5R X5R X7R

B/X5R

X5R

Cap

[pF]

CH

VDC

[3-digit]

102

10V 6.3V 4V 50V 25V 16V 50V 25V 16V 10V 16V 10V 6.3V 25V 10V 16V 25V 16V 10V 10V

VDC

[3-digit]

100

25V

50V

0.001

0.0022

0.0047

0.01

B

10

12

15

18

22

27

33

39

47

56

68

82

100

P

B

222

120

472

150

103

P

B

180

0.022

0.047

0.1

223

220

473

K

B

270

104

B

D

330

0.22

224

B

A

D

390

0.47

474

470

1.0

105

K

A

A,V

V

A

D

560

2.2

225

D

680

※Letters in the table indicate thickness.

820

101

※Letters in the table indicate thickness.

Temperature characteristics

Capacitance tolerance

Temp.char.Code

〔％〕

Applicable standard

Temperature range〔℃〕

－25～＋85

Ref. Temp〔. ℃〕

Capacitance change

±10［％］

±15［％］

±60［ppm/℃］

JIS

EIA

JIS

EIA

B

20

25

20

25

BJ

B7

CH

±10（K）

±20（M）

X5R

X7R

CH

－55～＋85

－55～＋125

±10（K）

C0H

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlcc08_e-01

36

■ REPRESENTATIVE PART NUMBERS

●096TYPEꢀ2 circuits type

【Temperature CharacteristicꢀBJ：B/X5R】

・0.45mm thicknes（s K）

HALT

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance Capacitance

tanδ

〔%〕

Thickness

〔mm〕

Part number 1

Part number 2

Note

% Rated

voltage

〔μF〕

tolerance

6.3V

J2K096 BJ473□K

J2K096 BJ104□K

J2K096 BJ224MK

J2K096 BJ474MK

A2K096 BJ105MK

X5R

0.047

0.1

±10, ±20

±20

5

0.45±0.05

R

150%

5

0.22

0.47

1

10

4V

・0.3mm thicknes（s P）

HALT

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance Capacitance

tanδ

〔%〕

Thickness

〔mm〕

Part number 1

Part number 2

Note

% Rated

voltage

〔μF〕

tolerance

10V

L2K096 BJ103□P

B/X5R

0.01

±10, ±20

5

0.3±0.03

R

200%

Capacitance tolerance code is applied to □ of part number.

【Temperature CharacteristicꢀCH：CH/C0H】

HALT

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance Capacitance

〔pF〕

Thickness

〔mm〕

Part number 1

Part number 2

Q

% Rated

voltage

tolerance

25V

T2K096 CH100FP

T2K096 CH120KP

T2K096 CH150KP

T2K096 CH180KP

T2K096 CH220KP

T2K096 CH270KP

T2K096 CH330KP

T2K096 CH390KP

T2K096 CH470KP

T2K096 CH560KP

T2K096 CH680KP

T2K096 CH820KP

T2K096 CH101KP

CH/C0H

10

12

15

18

22

27

33

39

47

56

68

82

100

±1pF

±10%

600

640

0.3±0.03

R

200%

700

760

840

940

1000

Capacitance tolerance code is applied to □ of part number.

●110TYPEꢀ2 circuits type

【Temperature CharacteristicꢀBJ：B/X5R】

・0.8mm thicknes（s A）

HALT

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance Capacitance

tanδ

〔%〕

Thickness

〔mm〕

Part number 1

Part number 2

Note

% Rated

voltage

〔μF〕

tolerance

16V

10V

E2K110 BJ105□A

L2K110 BJ474□A

L2K110 BJ105□A

J2K110 BJ225□A

X5R

B/X5R

X5R

1

0.47

1

±10, ±20

10

5

0.8±0.08

R

150%

200%

150%

10

6.3V

X5R

2.2

・0.6mm thicknes（s B）

HALT

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance Capacitance

tanδ

〔%〕

Thickness

〔mm〕

Part number 1

Part number 2

Note

% Rated

voltage

〔μF〕

tolerance

50V

U2K110 BJ102□B

U2K110 BJ222□B

U2K110 BJ472□B

T2K110 BJ103□B

T2K110 BJ223□B

T2K110 BJ104□B

E2K110 BJ473□B

E2K110 BJ104□B

L2K110 BJ224□B

B/X5R*¹

B/X5R

B/X5R*¹

B/X5R

0.001

0.0022

0.0047

0.01

±10, ±20

3.5

5

0.6±0.06

R

200%

25V

0.022

0.1

16V

10V

0.047

0.1

3.5

5

0.22

5

・0.5mm thicknes（s V）

HALT

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance Capacitance

tanδ

〔%〕

Thickness

〔mm〕

Part number 1

Part number 2

Note

% Rated

voltage

〔μF〕

tolerance

10V

L2K110 BJ105MV

X5R

1

±20

±10, ±20

10

0.5±0.05

R

150%

6.3V

J2K110 BJ105□V

Capacitance tolerance code is applied to □ of part number.

*1ꢀWe may provide X7R for some itemes according to the individual speciﬁcation.

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlcc08_e-01

37

■ REPRESENTATIVE PART NUMBERS

【Temperature CharacteristicꢀB7：X7R】

HALT

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance Capacitance

tanδ

〔%〕

Thickness

〔mm〕

Part number 1

Part number 2

Note

% Rated

voltage

〔μF〕

tolerance

50V

U2K110 B7102□B

U2K110 B7222□B

U2K110 B7472□B

T2K110 B7103□B

T2K110 B7223□B

E2K110 B7473□B

E2K110 B7104□B

X7R

0.001

0.0022

0.0047

0.01

±10, ±20

3.5

5

0.6±0.06

R

200%

25V

16V

0.022

0.047

0.1

Capacitance tolerance code is applied to □ of part number.

【Temperature CharacteristicꢀCH：CH/C0H】

HALT

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance Capacitance

Thickness

〔mm〕

Part number 1

Part number 2

Q

Note

% Rated

voltage

〔pF〕

tolerance

50V

U2K110 CH100FB

U2K110 CH120KB

U2K110 CH150KB

U2K110 CH180KB

U2K110 CH220KB

U2K110 CH270KB

U2K110 CH330KB

U2K110 CH390KB

U2K110 CH470KB

U2K110 CH560KB

U2K110 CH680KB

U2K110 CH820KB

U2K110 CH101KB

CH/C0H

10

12

15

18

22

27

33

39

47

56

68

82

100

±1pF

±10%

600

640

0.6±0.06

R

200%

700

760

840

940

1000

●212TYPEꢀ2 circuits type

【Temperature CharacteristicꢀBJ：B/X5R】

HALT

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance Capacitance

tanδ

〔%〕

Thickness

〔mm〕

Part number 1

Part number 2

Note

% Rated

voltage

〔μF〕

tolerance

25V

10V

T2K212 BJ105□D

L2K212 BJ225MD

B/X5R

X5R

1

±10, ±20

±20

5

0.85±0.1

R

200%

150%

2.2

10

Capacitance tolerance code is applied to □ of part number.

●212TYPEꢀ4 circuits type

【Temperature CharacteristicꢀBJ：B/X5R】

HALT

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance Capacitance

tanδ

〔%〕

Thickness

〔mm〕

Part number 1

Part number 2

Note

% Rated

voltage

〔μF〕

tolerance

25V

16V

10V

T4K212 BJ104□D

E4K212 BJ104□D

L4K212 BJ224□D

L4K212 BJ474□D

L4K212 BJ105□D

B/X5R

B/X5R*¹

B/X5R

X5R

0.1

±10, ±20

5

0.85±0.1

R

200%

150%

0.22

0.47

1

5

10

Capacitance tolerance code is applied to □ of part number.

*1ꢀWe may provide X7R for some itemes according to the individual speciﬁcation.

【Temperature CharacteristicꢀB7：X7R】

HALT

Soldering

R:Reﬂow

W:Wave

Internal

code

（P/N 1）

Rated

voltage

Temp.

char.

Capacitance Capacitance

tanδ

〔%〕

Thickness

〔mm〕

Part number 1

Part number 2

Note

% Rated

voltage

〔μF〕

tolerance

16V

E4K212 B7104□D

X7R

0.1

±10, ±20

5

0.85±0.1

R

200%

Capacitance tolerance code is applied to □ of part number.

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlcc08_e-01

38

■ ELECTRICAL CHARACTERISTICS

●Example of Impedance ESR vs. Frequency characteristics

Taiyo Yuden multilayer ceramic capacitor

■

J2K096BJ104MK

T2K096CH100FP

T2K096CH101KP

L2K096BJ103MP

100000

10000

1000

100000

10000

1000

1000000

ESR

Impedance

ESR

Impedance

100000

10000

1000

100

100000

10000

1000

100

10

100

10

1

0.1

1

0.1

1

0.1

1

0.1

0.01

0.1

0.01

0.1

0.01

1

0.01

1

10

100 1000 10000100000

1

10

100 1000 10000100000

10

100

1000

10000

10

100

1000

10000

〔MHz〕

T2K110BJ103MB/T2K110B7103MB

E2K110BJ104MB/E2K110B7104MB

L2K110BJ105MA

J2K110BJ225MA

1000000

100000

10000

1000

100

100000

10000

1000

10000

1000

100

10

100

10

1

100

10

1

10

1

0.1

1

0.1

0.01

0.1

0.01

0.001

0.1

0.001

0.1

0.001

0.1

0.001

0.1

1

10

100 1000 10000100000

1

10

100 1000 10000100000

1

10

100 1000 10000100000

1

10

100 1000 10000100000

L4K212BJ105KD

10000

1000

100

10

1

0.1

0.01

0.001

0.1

1

10

100 1000 10000100000

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlcc08_e-01

39

■ PACKAGING

①Minimum Quantity

◦Taped package

③Representative taping dimensions

ꢀ◦Paper Tape（8mm wide）

ꢀ◦Pressed carrier tape（2mm pitch）

Thickness

mm

Standard quantity [pcs]

Type

Embossed

㧗0.1/−0

code

Paper tape

tape

□

MK042

0.2

0.3

C

P,T

P

—

15000

40000

□MK063

0.3

□2K096

0.45

0.3

K

10000

P

□WK105

0.5

V

—

T1

0.2

C

P

20000

15000

□MK105

□VK105

0.3

0.5

V, W

W

K

Unit：mm

10000

0.5

Chip Cavity

Insertion Pitch

Tape Thickness

Type

0.45

0.5

4000

Ａ

Ｂ

Ｆ

Ｔ

T1

□MK107

□WK107

V

—

4000

□MK063

□WK105

0.37

0.67

0.45max.

0.42max.

2.0±0.05

0.8

A

0.65

1.15

0.45max.

0.5

V

□2K110

0.6

B

4000

—

0.8

A

◦Punched carrier tape（2mm pitch）

0.45

0.85

1.25

0.85

1.15

1.25

1.6

K

□MK212

□WK212

D

㧗0.1/−0

G

D

—

3000

□4K212

□2K212

D

4000

—

D

F

□MK316

3000

2000

G

L

—

0.85

1.15

1.9

D

Unit：mm

F

Chip Cavity

Type

Insertion Pitch

Tape Thickness

T

□MK325

N

Y

—

A

B

F

2.0max

2.5

0.45max.

0.6max.

M

500（T）, 1000（P）

□2K096

0.72

1.02

□MK432

2.5

500

52.0±0.05

□MK105

□VK105

0.65

1.15

0.8max.

②Taping material

※No bottom tape for pressed carrier tape

◦Punched carrier tape（4mm pitch）

◦Paper tape

㧗0.1/−0

Unit：mm

Chip Cavity

Type

Insertion Pitch

F

Tape Thickness

T

A

B

□MK107

□WK107

□2K110

1.0

1.15

1.8

1.1max.

1.0max.

◦Embossed tape

1.55

□MK212

□WK212

□4K212

□2K212

4.0±0.1

1.65

2.0

2.4

3.6

1.1max.

□MK316

◦Chip ﬁlled

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlcc_pack_e-01

mlcc_pack-P1

■ PACKAGING

◦Embossed tape（4mm wide）

④Trailer and Leader

0.8±0.04

0.9±0.05

100mm or more

Trailer 160mm min.

Leader 400mm min.

1.0±0.02

2.0±0.04

Ｆ

Unit：mm

Tape Thickness

⑤Reel size

Chip Cavity

Insertion Pitch

Type

□MK042

A

B

F

K

T

t

0.23

0.43

1.0±0.02

0.5max.

0.25max.

E

C

◦Embossed tape（8mm wide）

A

㧗0.1/−0

B

D

R

W

Unit：mm

A

B

C

φ178±2.0

φ50min.

φ13.0±0.2

Unit：mm

Tape Thickness

D

E

R

Chip Cavity

Type

Insertion Pitch

F

φ21.0±0.8

2.0±0.5

1.0

A

B

K

T

□WK107

□MK212

□MK316

□MK325

1.0

1.65

2.0

2.8

1.8

2.4

3.6

1.3max

0.25±0.1

t

W

4.0±0.1

4mm wide tape

8mm wide tape

12mm wide tape

1.5max.

2.5max.

5±1.0

10±1.5

14±1.5

3.4max.

0.6max.

◦Embossed tape（12mm wide）

⑥Top Tape Strength

㧗0.1/−0

The top tape requires a peel-off force of 0.1 to 0.7N in the direction of the arrow

as illustrated below.

2.0±0.1

F

⑦Bulk Cassette

The exchange of individual speciﬁcation is necessary.

Please contact Taiyo Yuden sales channels.

Unit：mm

Tape Thickness

Chip Cavity

Type

Insertion Pitch

A

B

F

K

T

□MK432

3.7

4.9

8.0±0.1

4.0max.

0.6max.

12±0.1

36＋0/－0.2

110±0.7

2.0＋0/－0.1

1.5＋0.1/－0

1.0＋0/－0.1

Unit：mm

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlcc_pack_e-01

mlcc_pack-P2

■ RELIABILITY DATA

Super Low Distortion Multilayer Ceramic Capacitors and Medium-High

Voltage Multilayer Ceramic Capacitors are noted separately.

Multilayer Ceramic Capacitors

1.Operating Temperature Range

Standard

Temperature Compensating

（Class 1）

－55 to ＋125℃

Speciﬁcation

High Frequency Type

Temperature Range

B

－25 to ＋85℃

－55 to ＋85℃

－55 to ＋125℃

－55 to ＋105℃

－55 to ＋125℃

－25 to ＋85℃

－30 to ＋85℃

BJ

X5R

X7R

X6S

X7S

F

Speciﬁed

Value

B7

C6

C7

High Permittivity（Class 2）

F

Y5V

2. Storage Conditions

Standard

Temperature Compensating

（Class 1）

－55 to ＋125℃

Speciﬁcation

High Frequency Type

Temperature Range

－25 to ＋85℃

－55 to ＋85℃

－55 to ＋125℃

－55 to ＋105℃

－55 to ＋125℃

－25 to ＋85℃

－30 to ＋85℃

B

BJ

X5R

X7R

X6S

X7S

F

Speciﬁed

Value

B7

C6

C7

High Permittivity（Class 2）

F

Y5V

3. Rated Voltage

Standard

50VDC, 25VDC, 16VDC

50VDC, 16VDC

Temperature Compensating

（Class 1）

Speciﬁed

Value

High Frequency Type

High Permittivity（Class 2）

50VDC, 35VDC, 25VDC, 16VDC, 10VDC, 6.3VDC, 4VDC

4. Withstanding Voltage（Between terminals）

Standard

Temperature Compensating

（Class 1）

Speciﬁed

Value

High Frequency Type

No breakdown or damage

High Permittivit（y Class 2）

【Test Methods and Remarks】

Class 1

Class 2

Applied voltage

Duration

Rated voltage×3 Rated voltage×2.5

1 to 5 sec.

Charge/discharge current

50mA max.

5. Insulation Resistance

Standard

Temperature Compensating

（Class 1）

10000 MΩ min.

Speciﬁed

Value

High Frequency Type

C≦0.047μF : 10000 MΩ min.

C＞0.047μF : 500MΩ・μF

High Permittivity（Class 2）Note 1

【Test Methods and Remarks】

Applied voltage: Rated voltage

Duration: 60±5 sec.

Charge/discharge current: 50mA max.

6. Capacitance（Tolerance）

0.5pF≦C≦5pF：±0.25pF

0.5pF<C≦10pF：±0.5pF

C＞10pF：±5%

0.5pF≦C≦2pF：±0.1pF

C＞2pF：±5%

RH

S△

T△

C△

U△

Standard

Temperature Compensating

（Class 1）

ꢀ

Speciﬁed

Value

0.5pF≦C≦2pF：±0.1pF

C＞2pF：±5%

CH

RH

High Frequency Type

High Permittivity（Class 2）

BJ, B7, C6,C7：±10％ or ±20％, F：－20％／＋80％

【Test Methods and Remarks】

Class 1

Class 2

Standard

High Frequency Type

C≦10μF

C＞10μF

Preconditioning

None

Thermal treatment（at 150℃ for 1hr）Note 2

Measuring frequency

Measuring voltage Note 1

Bias application

1ＭHz±10％

0.5 to 5Vrms

1ｋHz±10％

1±0.2Vrms

120±10Hz

0.5±0.1Vrms

None

7. Q or Dissipation Factor

Standard

C＜30 pF：Q≧400＋20C、C≧30 pF：Q≧1000ꢀ（C：Nominal capacitance）

Refer to detailed speciﬁcation

Temperature Compensating

（Class 1）

Speciﬁed

Value

High Frequency Type

High Permittivit（y Class 2）Note 1

BJ, B7, C6,C7：2.5％ max.,ꢀF：7％ max.

【Test Methods and Remarks】

Class 1

High Frequency Type

Class 2

Standard

C≦10μF

C＞10μF

Preconditioning

None

Thermal treatment（at 150℃ for 1hr）Note 2

Measuring frequency

Measuring voltage Note 1

Bias application

1ＭHz±10％

1GHz

1ｋHz±10％

1±0.2Vrms

120±10Hz

0.5±0.1Vrms

High Frequency Type

Measuring equipment: HP4291A

Measuring jig: HP16192A

0.5 to 5Vrms

None

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlcc_reli_e-01

mlcc_reli-R1

■ RELIABILITY DATA

8. Temperature Characteristic（Without voltage application）

Temperature Characteristic［ppm/℃］

C□ ：0 CH, CJ, CK

Tolerance

Standard

R□ ：ー220 RH

H±60

J±120

K±250

Temperature Compensating

（Class 1）

S□ ：ー330 SH, SJ, SK

T□ ：ー470 TJ, TK

U□ ：ー750 UJ, UK

SL ：＋350 to －1000

High Frequency Type

Speciﬁed

Value

Speciﬁcation Capacitance change Reference temperature

Temperature Range

－25 to ＋85℃

－55 to ＋85℃

－55 to ＋125℃

－55 to ＋105℃

－55 to ＋125℃

－25 to ＋85℃

－30 to ＋85℃

B

±10％

±15％

20℃

25℃

20℃

25℃

BJ

X5R

X7R

X6S

X7S

F

B7

C6

C7

±15％

±22％

＋30/ー80％

＋22/ー82％

High Permittivity（Class 2）

F

Y5V

【Test Methods and Remarks】

Class 1

Capacitance at 20℃ and 85℃ shall be measured in thermal equilibrium, and the temperature characteristic shall be calculated from the following equation.

（C₈₅－C₂₀

）

6

× 10（ppm/℃）

C₂₀×△Tꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ△T＝65

Class 2

Capacitance at each step shall be measured in thermal equilibrium, and the temperature characteristic shall be calculated from the following equation.

（C－C₂）

×100（％）

Step

B、F

Minimum operating temperature

20℃ 25℃

X5R、X7R、X6S、X7S、Y5V

C₂

1

2

3

C

：Capacitance in Step 1 or Step 3

C₂：Capacitance in Step 2

Maximum operating temperature

9. Deﬂection

Appearance :

No abnormality

Standard

Capacitance change : Within ±5% or ±0.5 pF, whichever is larger.

Temperature Compensating

（Class 1）

Speciﬁed

Value

Appearance :

Capacitance change : Within±0.5 pF

Appearance : No abnormality

Capacitance change : Within ±12.5%（BJ, B7, C6, C7）, Within ±30%（F）

No abnormality

High Frequency Type

High Permittivity（Class 2）

【Test Methods and Remarks】

Multilayer Ceramic Capacitors

Board

Thickness

0.8mm

Warp Duration

1mm 10 sec.

042、063 Type

The other types

Board

glass epoxy-resin substrate

Warp

1.6mm

Array Type

Board

Thickness

1.6mm

Warp Duration

1mm 10 sec.

Capacitance measurement shall

be conducted with the board bent

096、110、212 Type

glass epoxy-resin substrate

10. Body Strength

Standard

—

Temperature Compensating

（Class 1）

Speciﬁed

Value

High Frequency Type

No mechanical damage.

High Permittivity（Class 2）

—

【Test Methods and Remarks】

High Frequency Type

Applied force: 5N

Duration: 10 sec.

A

11. Adhesive Strength of Terminal Electrodes

Standard

High Frequency Type

Temperature Compensating

（Class 1）

Speciﬁed

Value

No terminal separation or its indication.

High Permittivity（Class 2）

【Test Methods and Remarks】

Multilayer Ceramic Capacitors

Array Type

Applied force

Duration

Applied force

Duration

042、063 Type

105 Type or more

2N

5N

096 Type

2N

5N

30±5 sec.

110、212 Type

12. Solderability

Standard

Temperature Compensating

（Class 1）

Speciﬁed

Value

High Frequency Type

At least 95% of terminal electrode is covered by new solder.

High Permittivity（Class 2）

【Test Methods and Remarks】

Solder type

H60A or H63A

Sn-3.0Ag－0.5Cu

Solder temperature

Duration

Eutectic solder

230±5℃

245±3℃

4±1 sec.

Lead-free solder

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlcc_reli_e-01

mlcc_reli-R2

■ RELIABILITY DATA

13. Resistance to Soldering

Appearance:

Capacitance change: Within ±2.5% or ±0.25pF, whichever is larger.

Q: Initial value

No abnormality

Standard

Insulation resistance: Initial value

Withstanding voltage（between terminals）: No abnormality

Temperature Compensating

（Class 1）

Appearance:

Capacitance change: Within ±2.5%

Q: Initial value

No abnormality

Speciﬁed

Value

High Frequency Type

Insulation resistance: Initial value

Withstanding voltage（between terminals）: No abnormality

Appearance:

No abnormality

Capacitance change: Within ±7.5%（BJ, B7, C6, C7）

Within ±20%（F）

Initial value

High Permittivity（Class 2）ꢀNote 1

Dissipation factor:

Insulation resistance: Initial value

Withstanding voltage（between terminals）: No abnormality

【Test Methods and Remarks】

Class 1

Class 2

105 Type

Arra（y 096, 110 Type）

None

105, 107, 212 Type

Arra（y 096, 110,212 Type）

Thermal treatment（at 150℃ for 1 hr）Note 2

042, 063 Type

042、063 Type

316, 325 Type

Preconditioning

Preheating

Preconditioning

Preheating

150℃, 1 to 2 min.

80 to 100℃, 2 to 5 min.

150 to 200℃, 2 to 5 min.

150℃, 1 to 2 min.

80 to 100℃, 2 to 5 min. 80 to 100℃, 5 to 10 min.

150 to 200℃, 2 to 5 min. 150 to 200℃, 5 to 10 min.

Solder temp.

Duration

270±5℃

3±0.5 sec.

6 to 24 hrs（Standard condition）Note 5

Solder temp.

Duration

270±5℃

3±0.5 sec.

24±2 hrs（Standard condition）Note 5

ꢀ

Recovery

14. Temperature Cycle (Thermal Shock）

Appearance:

Capacitance change: Within ±2.5% or ±0.25pF, whichever is larger.

Q: Initial value

No abnormality

Standard

Insulation resistance: Initial value

Withstanding voltage（between terminals）: No abnormality

Temperature Compensating

（Class 1）

Appearance:

Capacitance change: Within ±0.25pF

Q: Initial value

No abnormality

Speciﬁed

Value

High Frequency Type

Insulation resistance: Initial value

Withstanding voltage（between terminals）: No abnormality

Appearance:

No abnormality

Capacitance change: Within ±7.5%（BJ, B7, C6, C7）

Within ±20%（F）

Initial value

High Permittivity（Class 2）ꢀNote 1

Dissipation factor:

Insulation resistance: Initial value

Withstanding voltage（between terminals）: No abnormality

【Test Methods and Remarks】

Class 1

None

Class 2

Preconditioning

1 cycle

Thermal treatment（at 150℃ for 1 hr）Note 2

Step

Temperature（℃）

Lowest operating temperature ＋0/－3

Normal temperature

Time（min.）

30±3

2 to 3

1

2

3

4

Highest operating temperature ＋0/－3

Normal temperature

30±3

2 to 3

Number of cycles

Recovery

5 times

6 to 24 hrs（Standard condition）Note 5

24±2 hrs（Standard condition）Note 5

15. Humidity（Steady State）

Appearance:

No abnormality

Capacitance change: Within ±5% or ±0.5pF, whichever is larger.

Q： C＜10pF： Q≧200＋10Cꢀ

10≦C＜30pF： Q≧275＋2.5C

C≧30pF： Q≧350 （C：Nominal capacitance）

Insulation resistance: 1000 MΩ min.

Appearance: No abnormality

Standard

Temperature Compensating

（Class 1）

Speciﬁed

Value

High Frequency Type

Capacitance change: Within ±0.5pF,

Insulation resistance: 1000 MΩ min.

Appearance:

No abnormality

Capacitance change: Within ±12.5%（BJ, B7, C6, C7）

Within ±30%（F）

High Permittivity（Class 2）ꢀNote 1

Dissipation factor：

5.0% max.（BJ, B7, C6, C7）

11.0% max（. F）

Insulation resistance: 50 MΩμF or 1000 MΩ whichever is smaller.

【Test Methods and Remarks】

Class 1

Class 2

Standard

40±2℃

High Frequency Type

All items

Thermal treatment（at 150℃ for 1 hr）ꢀNote 2

40±2℃

Preconditioning

Temperature

Humidity

None

Preconditioning

Temperature

Humidity

60±2℃

90 to 95％RH

Duration

500＋24/ー0 hrs

Duration

500＋24/ー0 hrs

Recovery

6 to 24 hrs（Standard condition）Note 5

Recovery

24±2 hrs（Standard condition）Note 5

ꢀ

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlcc_reli_e-01

mlcc_reli-R3

■ RELIABILITY DATA

16. Humidity Loading

Appearance:

No abnormality

Capacitance change: Within ±7.5% or ±0.75pF, whichever is larger.

Standard

Q：

C＜30pF：Q≧100＋10C/3

C≧30pF：Q≧200

（C：Nominal capacitance）

Temperature Compensating

（Class 1）

Insulation resistance: 500 MΩ min.

Appearance: No abnormality

Capacitance change: C≦2pF：Within ±0.4 pF

Speciﬁed

Value

High Frequency Type

C＞2pF：Within ±0.75 pF

（C：Nominal capacitance）

Insulation resistance: 500 MΩ min.

Appearance:

No abnormality

Capacitance change: Within ±12.5%（BJ, B7, C6, C7）

Within ±30%（F）

High Permittivity（Class 2）ꢀNote 1

Dissipation factor：

5.0% max.（BJ, B7, C6, C7）

11.0% max（. F）

Insulation resistance: 25 MΩμF or 500 MΩ, whichever is smaller.

【Test Methods and Remarks】

Class 1

Class 2

Standard

High Frequency Type

All items

Preconditioning

Temperature

Humidity

None

Preconditioning

Voltage treatment

（Rated voltage are applied for 1 hour at 40℃）Note 3

40±2℃

60±2℃

Temperature

Humidity

40±2℃

90 to 95％RH

500＋24/ー0 hrs

90 to 95％RH

Duration

500＋24/ー0 hrs

Rated voltage

50mA max.

Duration

Applied voltage

Charge/discharge current

Recovery

Applied voltage

Charge/discharge current

Recovery

Rated voltage

50mA max.

6 to 24 hrs（Standard condition）Note 5

ꢀ

24±2 hrs（Standard condition）Note 5

17. High Temperature Loading

Appearance:

No abnormality

Capacitance change: Within ±3% or ±0.3pF, whichever is larger.

Q： C＜10pF： Q≧200＋10C

10≦C＜30pF：Q≧275＋2.5C

C≧30pF： Q≧350（C：Nominal capacitance）

Insulation resistance: 1000 MΩ min.

Appearance: No abnormality

Standard

Temperature Compensating

（Class 1）

Speciﬁed

Value

High Frequency Type Capacitance change: Within ±3% or ±0.3pF, whichever is larger.

Insulation resistance: 1000 MΩ min.

Appearance:

No abnormality

Capacitance change: Within ±12.5%（BJ, B7, C6, C7）

Within ±30%（F）

High Permittivity（Class 2）ꢀNote 1

Dissipation factor：

5.0% max（. BJ, B7, C6, C7）

11.0% max（. F）

Insulation resistance: 50 MΩμF or 1000 MΩ, whichever is smaller.

【Test Methods and Remarks】

Class 1

Class 2

Standard

High Frequency Type

BJ, F

C6

B7, C7

Preconditioning

Temperature

None

Preconditioning

Voltage treatment（Twice the rated voltage shall be

applied for 1 hour at 85℃, 105℃ or 125℃）Note 3, 4

125±3℃

Temperature

Duration

85±2℃

105±3℃

1000＋48/ー0 hrs

Rated voltage×2ꢀNote 4

50mA max.

125±3℃

Duration

1000＋48/ー0 hrs

Rated voltage×2

50mA max.

Applied voltage

Charge/discharge current

Recovery

Applied voltage

Charge/discharge current

Recovery

6 to 24hr（Standard condition）Note 5

ꢀ

24±2 hrs（Standard condition）Note 5

Note 1 The ﬁgures indicate typical speciﬁcations. Please refer to individual speciﬁcations in detail.

Note 2 Thermal treatment : Initial value shall be measured after test sample is heat-treated at 150＋0/－10℃ for an hour and kept at room temperature for 24±2hours.

Note 3 Voltage treatment : Initial value shall be measured after test sample is voltage-treated for an hour at both the temperature and voltage speciﬁed in the test conditions, and

kept at room temperature for 24±2hours.

Note 4 Standard condition: Temperature: 5 to 35℃, Relative humidity: 45 to 85 % RH, Air pressure: 86 to 106kPa

When there are questions concerning measurement results, in order to provide correlation data, the test shall be conducted under the following condi-

tion.

Temperature: 20±2℃, Relative humidity: 60 to 70 % RH, Air pressure: 86 to 106kPa

Unless otherwise speciﬁed, all the tests are conducted under the "standard condition".

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlcc_reli_e-01

mlcc_reli-R4

■ PRECAUTIONS

Precautions on the use of Multilayer Ceramic Capacitors

1. Circuit Design

◆Veriﬁcation of operating environment, electrical rating and performance

1.A malfunction of equipment in ﬁelds such as medical, aerospace, nuclear control, etc. may cause serious harm to human life or have severe social ramiﬁcations.

Therefore, any capacitors to be used in such equipment may require higher safety and reliability, and shall be clearly differentiated from them used in general pur-

pose applications.

◆Operating Voltage（Veriﬁcation of Rated voltage）

1.The operating voltage for capacitors must always be their rated voltage or less.

Precautions

If an AC voltage is loaded on a DC voltage, the sum of the two peak voltages shall be the rated voltage or less.

For a circuit where an AC or a pulse voltage may be used, the sum of their peak voltages shall also be the rated voltage or less.

2.Even if an applied voltage is the rated voltage or less reliability of capacitors may be deteriorated in case that either a high frequency AC voltage or a pulse voltage

having rapid rise time is used in a circuit.

2. PCB Design

◆Pattern conﬁgurations（Design of Land-patterns）

1. When capacitors are mounted on PCBs, the amount of solder used（size of ﬁllet）can directly affect the capacitor performance. Therefore, the following items must

be carefully considered in the design of land patterns:

（1）Excessive solder applied can cause mechanical stresses which lead to chip breaking or cracking. Therefore, please consider appropriate land-patterns for proper

amount of solder.

Precautions

（2）When more than one component are jointly soldered onto the same land, each component's soldering point shall be separated by solder-resist.

◆Pattern conﬁguration（s Capacitor layout on PCBs）

After capacitors are mounted on boards, they can be subjected to mechanical stresses in subsequent manufacturing processes（PCB cutting, board inspection,

mounting of additional parts, assembly into the chassis, wave soldering of the boards, etc.）. For this reason, land pattern conﬁgurations and positions of capacitors

shall be carefully considered to minimize stresses.

◆Pattern conﬁgurations（Design of Land-patterns）

The following diagrams and tables show some examples of recommended land patterns to prevent excessive solder amounts.

（1）Recommended land dimensions for typical chip capacitors

●Multilayer Ceramic Capacitors : Recommended land dimensions（unit: mm）

ꢀWave-soldering

Land patterns for PCBs

Chip capacitor

Land

Type 107

212

2.0

316

3.2

1.6

325

3.2

2.5

L

1.6

0.8

Solder-resist

Size

W

51.25

A

0.8 to 1.0 1.0 to 1.4 1.8 to 2.5 1.8 to 2.5

0.5 to 0.8 0.8 to 1.5 0.8 to 1.7 0.8 to 1.7

0.6 to 0.8 0.9 to 1.2 1.2 to 1.6 1.8 to 2.5

C

B

C

B

A

Reﬂow-soldering

Type 042

063

0.6

0.3

105

1.0

0.5

107

1.6

0.8

212

2.0

316

3.2

1.6

325

3.2

2.5

432

4.5

3.2

Chip capacitor

L

0.4

0.2

Size

W

51.25

W

A

0.15 to 0.25 0.20 to 0.30 0.45 to 0.55 0.8 to 1.0 0.8 to 1.2 1.8 to 2.5 1.8 to 2.5 2.5 to 3.5

0.15 to 0.20 0.20 to 0.30 0.40 to 0.50 0.6 to 0.8 0.8 to 1.2 1.0 to 1.5 1.0 to 1.5 1.5 to 1.8

0.15 to 0.30 0.25 to 0.40 0.45 to 0.55 0.6 to 0.8 0.9 to 1.6 1.2 to 2.0 1.8 to 3.2 2.3 to 3.5

B

C

L

●LWDC: Recommended land dimensions for reﬂow-soldering（unit: mm）

LWDC

Type

105

0.52

107

50.8

212

1.25

L

Size

W

1.0

1.6

2.0

W

A

0.18 to 0.22

0.2 to 0.25

0.9 to 1.1

0.25 to 0.3

0.3 to 0.4

1.5 to 1.7

0.5 to 0.7

0.4 to 0.5

1.9 to 2.1

B

C

L

Technical

consider-

ations

●Array type: Recommended land dimensions for reﬂow-soldering（unit: mm）

Type 096（2 circuits）110（2 circuits）212（2 circuits） 212（4 circuits）

2 circuits

4 circuits

Chip capacitor

L

0.9

1.37

2.0

c

Size

W

0.6

1.0

1.25

a

b

a

b

a

0.25 to 0.35

0.15 to 0.25

0.45

0.35 to 0.45

0.55 to 0.65

0.3 to 0.4

0.64

0.5 to 0.6

1.0

0.5 to 0.6

0.2 to 0.3

0.5

b

c

d

Land

（2）Examples of good and bad solder application

Items

Not recommended

Recommended

Mixed mounting of

SMD and leaded

components

Component

placement close to

the chassis

Hand-soldering

of leaded

components

near mounted

components

Horizontal

component

placement

To next page

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlcc_prec_e-01

mlcc_prec-P1

■ PRECAUTIONS

Precautions on the use of Multilayer Ceramic Capacitors

2. PCB Design

◆Pattern conﬁguration（s Capacitor layout on PCBs）

1-1. The following is examples of good and bad capacitor layouts ; capacitors shall be located to minimize any possible mechanical stresses from board warp or de-

ﬂection.

Items

Not recommended

Recommended

Deﬂection of board

Technical

consider-

ations

1-2. The amount of mechanical stresses given will vary depending on capacitor layout. Please refer to diagram below.

1-3. When PCB is split, the amount of mechanical stress on the capacitors can vary according to the method used. The following methods are listed in order from

least stressful to most stressful: push-back, slit, V-grooving, and perforation. Thus, please consider the PCB, split methods as well as chip location.

3. Mounting

◆Adjustment of mounting machine

1.When capacitors are mounted on PCB, excessive impact load shall not be imposed on them.

2.Maintenance and inspection of mounting machines shall be conducted periodically.

Precautions ◆Selection of Adhesives

1.When chips are attached on PCBs with adhesives prior to soldering, it may cause capacitor characteristics degradation unless the following factors are appro-

priately checked : size of land patterns, type of adhesive, amount applied, hardening temperature and hardening period. Therefore, please contact us for further

information.

◆Adjustment of mounting machine

1. When the bottom dead center of a pick-up nozzle is too low, excessive force is imposed on capacitors and causes damages. To avoid this, the following points

shall be considerable.

（1）The bottom dead center of the pick-up nozzle shall be adjusted to the surface level of PCB without the board deﬂection.

（2）The pressure of nozzle shall be adjusted between 1 and 3 N static loads.

（3）To reduce the amount of deﬂection of the board caused by impact of the pick-up nozzle, supporting pins or back-up pins shall be used on the other side of the

PCB. The following diagrams show some typical examples of good and bad pick-up nozzle placement:

Items

Not recommended

Recommended

Single-sided

mounting

Double-sided

mounting

2. As the alignment pin is worn out, adjustment of the nozzle height can cause chipping or cracking of capacitors because of mechanical impact on the capacitors.

To avoid this, the monitoring of the width between the alignment pins in the stopped position, maintenance, check and replacement of the pin shall be conducted

periodically.

Technical

consider-

ations

◆Selection of Adhesives

Some adhesives may cause IR deterioration. The different shrinkage percentage of between the adhesive and the capacitors may result in stresses on the capaci-

tors and lead to cracking. Moreover, too little or too much adhesive applied to the board may adversely affect components. Therefore, the following precautions

shall be noted in the application of adhesives.

（1）Required adhesive characteristics

a. The adhesive shall be strong enough to hold parts on the board during the mounting & solder process.

b. The adhesive shall have sufﬁcient strength at high temperatures.

c. The adhesive shall have good coating and thickness consistency.

d. The adhesive shall be used during its prescribed shelf life.

e. The adhesive shall harden rapidly.

f . The adhesive shall have corrosion resistance.

g. The adhesive shall have excellent insulation characteristics.

h. The adhesive shall have no emission of toxic gasses and no effect on the human body.

（2）The recommended amount of adhesives is as follows;

［Recommended condition］

Figure

212/316 case sizes as examples

a

b

c

0.3mm min

100 to 120μm

Adhesives shall not contact land

ꢀꢀ

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlcc_prec_e-01

mlcc_prec-P2

■ PRECAUTIONS

Precautions on the use of Multilayer Ceramic Capacitors

4. Soldering

◆Selection of Flux

Since ﬂux may have a signiﬁcant effect on the performance of capacitors, it is necessary to verify the following conditions prior to use;

（1）Flux used shall be less than or equal to 0.1 wt%（in CI equivalent）of halogenated content. Flux having a strong acidity content shall not be applied.

（2）When shall capacitors are soldered on boards, the amount of ﬂux applied shall be controlled at the optimum level.

（3）When water-soluble ﬂux is used, special care shall be taken to properly clean the boards.

Precautions

◆Soldering

Temperature, time, amount of solder, etc. shall be set in accordance with their recommended conditions.

Sn-Zn solder paste can adversely affect MLCC reliability.

Please contact us prior to usage of Sn-Zn solder.

◆Selection of Flux

1-1. When too much halogenated substance（Chlorine, etc.）content is used to activate ﬂux, or highly acidic ﬂux is used, it may lead to corrosion of terminal elec-

trodes or degradation of insulation resistance on the surfaces of the capacitors.

1-2. Flux is used to increase solderability in wave soldering. However if too much ﬂux is applied, a large amount of ﬂux gas may be emitted and may adversely affect

the solderability. To minimize the amount of ﬂux applied, it is recommended to use a ﬂux-bubbling system.

1-3. Since the residue of water-soluble ﬂux is easily dissolved in moisture in the air, the residues on the surfaces of capacitors in high humidity conditions may cause

a degradation of insulation resistance and reliability of the capacitors. Therefore, the cleaning methods and the capability of the machines used shall also be

considered carefully when water-soluble ﬂux is used.

◆Soldering

• Ceramic chip capacitors are susceptible to thermal shock when exposed to rapid or concentrated heating or rapid cooling.

• Therefore, the soldering must be conducted with great care so as to prevent malfunction of the components due to excessive thermal shock.

• Preheating : Capacitors shall be preheated sufﬁciently, and the temperature difference between the capacitors and solder shall be within 100 to 130℃.

• Cooling : The temperature difference between the capacitors and cleaning process shall not be greater than 100℃.

［Reﬂow soldering］

【Recommended conditions for eutectic soldering】

【Recommended condition for Pb-free soldering】

300

Peak 260℃ Max.

Within 10sec.

Preheating

230℃

Within 10 sec.

60sec. 60sec.

200

100

0

Slow

cooling

Min.

Slow cooling

100

Heating above

Preheating 150℃

230℃

Capacitor

PC board

60sec. Min.

40sec. Max.

0

Solder

T

Caution

①The ideal condition is to have solder mass（ﬁllet）controlled to 1/2 to 1/3 of the thickness of a capacitor.

②Because excessive dwell times can adversely affect solderability, soldering duration shall be kept as

close to recommended times as possible.

Technical

consider-

ations

［Wave soldering］

【Recommended conditions for eutectic soldering】

【Recommended condition for Pb-free soldering】

300

Peak 260℃ Max.

230～250℃

Within 10sec.

Within 3sec.

Preheating

120sec. Min.

200

120sec. Min.

200

Slow

cooling

Slow cooling

Preheating

150℃

100

0

Caution

①Wave soldering must not be applied to capacitors designated as for reﬂow soldering only.

［Hand soldering］

【Recommended conditions for eutectic soldering】

【Recommended condition for Pb-free soldering】

400

300

200

100

0

400

300

200

100

0

Peak 350℃ Max.

Peak 280℃ Max.

230～280℃

Within 3 sec.

300

Within 3sec.

⊿T

Slow cooling

⊿T

200

Slow cooling

Preheating

150℃ Min.

Preheating

150℃ Min.

100

Preheating

60sec. Min.

0

⊿T

⊿T≦150℃

⊿T

⊿T≦130℃

316type or less

325type or more

Caution

①Use a 50W soldering iron with a maximum tip diameter of 1.0 mm.

②The soldering iron shall not directly touch capacitors.

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlcc_prec_e-01

mlcc_prec-P3

■ PRECAUTIONS

Precautions on the use of Multilayer Ceramic Capacitors

5. Cleaning

◆Cleaning conditions

1. When PCBs are cleaned after capacitors mounting, please select the appropriate cleaning solution in accordance with the intended use of the cleaning（. e.g. to

Precautions

remove soldering ﬂux or other materials from the production process.）

2. Cleaning condition shall be determined after it is veriﬁed by using actual cleaning machine that the cleaning process does not affect capacitor's characteristics.

1. The use of inappropriate cleaning solutions can cause foreign substances such as ﬂux residue to adhere to capacitors or deteriorate their outer coating, resulting in

a degradation of the capacitor's electrical properties（especially insulation resistance）.

2. Inappropriate cleaning conditions（insufﬁcient or excessive cleaning）may adversely affect the performance of the capacitors.

Technical

consider-

ations

In the case of ultrasonic cleaning, too much power output can cause excessive vibration of PCBs which may lead to the cracking of capacitors or the soldered

portion, or decrease the terminal electrodes' strength. Therefore, the following conditions shall be carefully checked;

Ultrasonic output : 20 W/ℓor less

Ultrasonic frequency : 40 kHz or less

Ultrasonic washing period : 5 min. or less

6. Resin coating and mold

1. With some type of resins, decomposition gas or chemical reaction vapor may remain inside the resin during the hardening period or while left under normal stor-

age conditions resulting in the deterioration of the capacitor's performance.

Precautions

7. Handling

2. When a resin's hardening temperature is higher than capacitor's operating temperature, the stresses generated by the excessive heat may lead to damage or

destruction of capacitors.

The use of such resins, molding materials etc. is not recommended.

◆Splitting of PCB

1. When PCBs are split after components mounting, care shall be taken so as not to give any stresses of deﬂection or twisting to the board.

2. Board separation shall not be done manually, but by using the appropriate devices.

Precautions

◆Mechanical considerations

Be careful not to subject capacitors to excessive mechanical shocks.

（1）If ceramic capacitors are dropped onto a ﬂoor or a hard surface, they shall not be used.

（2）Please be careful that the mounted components do not come in contact with or bump against other boards or components.

8. Storage conditions

◆Storage

1.To maintain the solderability of terminal electrodes and to keep packaging materials in good condition, care must be taken to control temperature and humidity in

the storage area. Humidity should especially be kept as low as possible.

・Recommended conditions

Ambient temperature

Humidity

: Below 30℃

: Below 70% RH

Precautions

The ambient temperature must be kept below 40℃. Even under ideal storage conditions, solderability of capacitor is deteriorated as time passes, so capaci-

tors shall be used within 6 months from the time of delivery.

・Ceramic chip capacitors shall be kept where no chlorine or sulfur exists in the air.

2.The capacitance values of high dielectric constant capacitors will gradually decrease with the passage of time,ｓo care shall be taken to design circuits . Even if

capacitance value decreases as time passes, it will get back to the initial value by a heat treatment at 150℃ for 1hour.

Technical If capacitors are stored in a high temperature and humidity environment, it might rapidly cause poor solderability due to terminal oxidation and quality loss of taping/

consider- packaging materials. For this reason, capacitors shall be used within 6 months from the time of delivery. If exceeding the above period, please check solderability be-

ations

fore using the capacitors.

※RCR-2335B（Safety Application Guide for ﬁxed ceramic capacitors for use in electronic equipment）is published by JEITA.

ꢀPlease check the guide regarding precautions for deﬂection test, soldering by spot heat, and so on.

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider the purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

mlcc_prec_e-01

mlcc_prec-P4


型号：	AMK325BB7105KA-T
厂家：	TAIYO YUDEN (U.S.A.), INC
描述：	Notice for TAIYO YUDEN products 有关本公司产品的注意事项
文件：	总51页 (文件大小：1328K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

AMK325BB7105KA-T [TAIYO YUDEN]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E